Friction Open Access Editor-in-Chief: Jianbin Luo
Home Friction All Issues Volume 11 Issue 5
Volume 11 Issue 5, May 2023
PP.647-838
|
12 articles
Review Article | Open Access
Nanomaterials for lubricating oil application: A review
Published: 06 January 2023
2023, 11 (5): 647-684
Research Article | Open Access
Wear monitoring method of water-lubricated polymer thrust bearing based on ultrasonic reflection coefficient amplitude spectrum
Published: 06 January 2023
2023, 11 (5): 685-703
Research Article | Open Access
Load and velocity boundaries of oil-based superlubricity using 1,3-diketone
Published: 06 January 2023
2023, 11 (5): 704-715
Research Article | Open Access
Large-scale fabrication of decoupling coatings with promising robustness and superhydrophobicity for antifouling, drag reduction, and organic photodegradation
Published: 06 January 2023
2023, 11 (5): 716-736
Research Article | Open Access
Drop impact dynamic and directional transport on dragonfly wing surface
Published: 06 January 2023
2023, 11 (5): 737-747
Research Article | Open Access
Achieving macroscale superlubricity with ultra-short running-in period by using polyethylene glycol-tannic acid complex green lubricant
Published: 06 January 2023
2023, 11 (5): 748-762
Research Article | Open Access
Friction and wear of multiple steel wires in a wire rope
Published: 06 January 2023
2023, 11 (5): 763-784
Research Article | Open Access
Strong dependency of the tribological behavior of CuZr-based bulk metallic glasses on relative humidity in ambient air
Published: 06 January 2023
2023, 11 (5): 785-800
Research Article | Open Access
Mitigation of tribocorrosion of metals in aqueous solutions by potential-enhanced adsorption of surfactants
Published: 06 January 2023
2023, 11 (5): 801-819
Research Article | Open Access
Does friction contribute to formability improvement using servo press?
Published: 06 January 2023
2023, 11 (5): 820-835
Erratum
Erratum to: Nano-enhanced biolubricant in sustainable manufacturing: From processability to mechanisms
Published: 16 July 2022
2023, 11 (5): 836-837
Erratum
Erratum to: Surface roughness measurements in NFMQL assisted turning of titanium alloys: An optimization approach
Published: 06 January 2023
2023, 11 (5): 838