Current transient analysis predominantly relies on zero-dimensional/one-dimensional tools, proficient at capturing aerothermodynamic variations across critical engine stations but insufficient for analyzing the internal flow field evolution during transients. Addressing this gap, the study presents an enhanced quasi-three dimensional (quasi-3D) transient simulation technique that integrates component volume effects, offering a significant leap from the preceding quasi-3D transient simulation method based on quasi-steady assumption. By embedding the component volume effects on density, momentum, and energy within the physical temporal dimension of the Navier-Stokes equations, the refined quasi-3D transient model achieves a closer representation of physical phenomena. Validation against a single-shaft turbofan engine’s experimental data confirms the model’s accuracy. Average errors for key performance indicators, including shaft speed, thrust, mass flow rate, and critical component exit temperature and pressure, remain below 0.41%, 5.69%, 2.55%, 3.18% and 0.67%, respectively. Crucially, the model exposes a discernible temporal lag in the compressor outlet pressure and temperature response due to volume effects—previously unquantified in quasi-3D transient simulations. And further exploration of the meridional flow field emphasizes the consequential role of volumes in transient flow field evolution. Incorporating volume effects within quasi-3D transient simulations enhances engine modeling and is pivotal for precise transient analysis in engine design and optimization.
- Article type
- Year
Open Access
Full Length Article
Issue
Open Access
Full Length Article
Issue
How to utilize existing flow control mechanisms to make profiled end wall design more flexible, efficient, and physical is a meaningful challenge. This study presents a three-dimensional inverse method for profiled end wall design to achieve the application of flow control mechanisms. The predetermined pressure distribution on the end wall is reached by modifying the end wall geometry during flow field calculation. A motion velocity model is derived from the normal momentum equation of the moving no-slip boundary to modify the end wall geometry. A Reynolds-Averaged Navier-Stokes (RANS) solver based on the Semi-Implicit Method for Pressure Linked Equations (SIMPLE) algorithm is adopted to simulate the flow field. Based on the mechanism understanding obtained through numerical optimization results, this study adopts the inverse method to redesign an optimized end wall in a compressor cascade. The results indicate that the redesigned end wall exhibits better loss reduction, reducing the overall total pressure loss by 5.5%, whereas the optimized end wall reduces it by 3%. The inverse method allows the imposition of desired influences on the end wall flow without constructing a database, making it highly flexible, efficient, and physical.
Open Access
Full Length Article
Issue
Swept blades are widely utilized in transonic compressors/fans and provide high load, high through-flow, high efficiency, and adequate stall margin. However, there is limited quantitative research on the mechanism of the effect of swept blades on the flow field, resulting in a lack of direct quantitative guidance for the design and analysis of swept blades in fans/compressors. To better understand this mechanism, this study employs a reduced-dimensional force equilibrium method to analyze more than 1500 swept cascades data. Results verify that circumferential fluctuation terms are responsible for inducing radial migration in the inlet airflow field of the swept blade, resulting in variations in the incidence angle and consequently leading to changes in the characteristics of the swept blade. Thus, a combination of simple functions and machine learning is utilized to model the circumferential fluctuation terms and quantify the sweep mechanism. The prediction accuracy of the model is high, with coefficient of determination greater than 0.95 on the test set. When the model is applied in a meridional flow analysis program, the calculation accuracy of the program for the incidence angle is improved by 0.4° and 0.6° at the design and off-design conditions respectively, compensating for the program's original deficiencies. Meanwhile, the model can also provide quantitative guidance for the design of swept blades, thereby reducing the number of design iterations and improving design efficiency.
Open Access
Full Length Article
Issue
The secondary flow attracts wide concerns in the aeroengine compressors since it has become one of the major loss sources in modern high-performance compressors. But the research about the quantitative relationship between secondary flow and inviscid blade force needs to be more detailed. In this paper, a database of 889 three-dimensional linear cascades was built. An indicator, called Secondary Flow Intensity (SFI), was used to express the loss caused by secondary flow. The quantitative relationship between the SFI and inviscid blade force deterioration was researched. Blade oil flow and Computation Fluid Dynamics (CFD) results of some cascades were also used to cross-validate. Results suggested that all numerical cascade cases can be divided into 3 clusters by the SFI, which are called Clusters A, B and C in the order of the increasing SFI indicator. The corner stall, known as the strong corner separation, only happens when the SFI is high. Both calculations and oil flow experiments show that the SFI would stay at a low level if the vortex core at the endwall surface does not appear. The strong interaction of Kutta condition and endwall cross-flow is considered the dominant mechanism of higher secondary flow losses, rather than the secondary flow penetration depth on the suction surface. In conclusion, the inviscid blade force spanwise deterioration is strongly related to the SFI. The correlation of the SFI and spanwise inviscid blade force deterioration is given in this paper. The correlation could provide a quantitative reference for estimating secondary flow losses in the design.
Open Access
Full Length Article
Issue
In the early stage of aircraft engine design, the through-flow method is an important tool for designers. The accuracy of the through-flow method depends heavily on the accuracy of the loss model. However, most existing models cannot (or cannot well) provide the spanwise loss distribution. To construct an effective spanwise loss model, both turbomachinery knowledge and machine learning skills were used in this paper. A large number of numerical simulations were carried out to build a database containing more than 1000 compressor cascade numerical samples. Secondary flow intensity was introduced as the independent variable to carry out feature engineering. A model containing a selector based on support vector machine regression and estimators based on K-nearest neighbor regression was constructed. Numerical test set and design data of two former highpressure core compressors were used for validation. Results suggest that the spanwise loss model show good consistency with both numerical test set and data of two former compressors. It can reflect the influence of secondary flow and can also predict both value and trend of total pressure loss coefficient well, with mean absolute error general around or less than 1% and R2 (coefficient of determination) more than 0.8 on the test set. Especially when dealing with loss coefficient at midspan position, the model shows even better performance, with R2 over 0.97 on the test set. And the selector of the model can well classify the samples, predict the intensity of secondary flow and help estimators to capture the phenomenon that end-wall secondary flow extends to the mid-span.
京公网安备11010802044758号