AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Full Length Article | Open Access

A spanwise loss model for axial compressor stator based on machine learning

Zixuan YUEa, Chenghua ZHOUa, Donghai JINa,b( ), Xingmin GUIa,b
Aeroengine Simulation Research Center, School of Energy and Power Engineering, Beihang University, Beijing 100083, China
Jiangxi Research Institue of Beihang University, Nanchang 330096, China

Peer review under responsibility of Editorial Committee of CJA.

Show Author Information

Abstract

In the early stage of aircraft engine design, the through-flow method is an important tool for designers. The accuracy of the through-flow method depends heavily on the accuracy of the loss model. However, most existing models cannot (or cannot well) provide the spanwise loss distribution. To construct an effective spanwise loss model, both turbomachinery knowledge and machine learning skills were used in this paper. A large number of numerical simulations were carried out to build a database containing more than 1000 compressor cascade numerical samples. Secondary flow intensity was introduced as the independent variable to carry out feature engineering. A model containing a selector based on support vector machine regression and estimators based on K-nearest neighbor regression was constructed. Numerical test set and design data of two former highpressure core compressors were used for validation. Results suggest that the spanwise loss model show good consistency with both numerical test set and data of two former compressors. It can reflect the influence of secondary flow and can also predict both value and trend of total pressure loss coefficient well, with mean absolute error general around or less than 1% and R2 (coefficient of determination) more than 0.8 on the test set. Especially when dealing with loss coefficient at midspan position, the model shows even better performance, with R2 over 0.97 on the test set. And the selector of the model can well classify the samples, predict the intensity of secondary flow and help estimators to capture the phenomenon that end-wall secondary flow extends to the mid-span.

References

【1】
【1】
 
 
Chinese Journal of Aeronautics
Pages 74-84

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
YUE Z, ZHOU C, JIN D, et al. A spanwise loss model for axial compressor stator based on machine learning. Chinese Journal of Aeronautics, 2022, 35(11): 74-84. https://doi.org/10.1016/j.cja.2022.05.013

829

Views

21

Crossref

18

Web of Science

21

Scopus

5

CSCD

Received: 12 July 2021
Revised: 26 August 2021
Accepted: 02 September 2021
Published: 03 June 2022
© 2022 Chinese Society of Aeronautics and Astronautics.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).