Sort:
Open Access Research Article Issue
Atomistic investigation of effect of twin boundary on machinability in diamond cutting of nanocrystalline 3C-SiC
AIMS Materials Science 2024, 11(6): 1149-1164
Published: 12 December 2024
Abstract PDF (45.1 MB) Collect
Downloads:135

The machinability of hard brittle nanocrystalline cubic silicon carbide (3C-SiC) is strongly dependent on internal microstructure and its adapted machining response. Here, we conducted molecular dynamic simulations to explore the machinability of nanotwinned 3C-SiC with a large number of twin boundaries in diamond cutting. The effect of the introduction of twin boundaries on the diamond cutting of nanocrystalline 3C-SiC, particular for its contribution to suppressing brittle fracture and improving ductile-mode cutting, was investigated in-depth. Our simulation results revealed that twin boundaries exerted a significant impact on the deformation mechanism and subsequent surface integrity of nanocrystalline 3C-SiC. Specifically, intergranular fracture was significantly suppressed by the introduction of twin boundaries. In addition, various deformation behaviors such as phase transformation, crack propagation, dislocation activity, and twin boundary-associated deformation mechanisms were operated in cutting process of nanotwinned 3C-SiC. Furthermore, the influence of twin boundary spacing on the diamond cutting characteristics of nanotwinned 3C-SiC was also addressed.

Open Access Paper Issue
7-axis synchronization-integrated on-the-fly laser texturing system of freeform surface: design and development
International Journal of Extreme Manufacturing 2025, 7(1)
Published: 07 November 2024
Abstract PDF (6.2 MB) Collect
Downloads:22

While laser surface texturing (LST) is a promising manufacturing technique for surface functionalization, simultaneously realizing high precision and high efficiency in the LST of complex curved surface is challenging, due to continuously varied geometries of laser-matter incidence. In the present work, we propose a novel manufacturing system of 7-axis on-the-fly LST for complex curved surface, based on the integrated synchronization of 5-axis linkage motion platform with 2-axis galvanometer. Specifically, the algorithm for decomposing spatial texture trajectory on curved surface into low-frequency and high-frequency parts is established, based on which the kinematic model of synchronized 7-axis system is developed to derive the motion of each axis in both 5-axis linkage motion platform and 2-axis galvanometer simultaneously. Subsequently, the synchronized 7-axis LST system is experimentally realized, including the setup of mechanical stages integrated with optical path, the configuration of numerical control unit, and the development of processing software. Finally, case study of 7-axis on-the-fly LST of freeform aluminum surface is performed, and the advantages in terms of processing efficiency and texturing accuracy over 5-axis linkage LST are demonstrated. The correlation of reduced following errors between mechanical stages with the promoted performance of curved surface texturing by the 7-axis on-the-fly LST is further analyzed. Current work provides a feasible solution for establishing the manufacturing system for high performance LST of complex curved surface.

Open Access Topical Review Issue
Numerical simulation of materials-oriented ultra-precision diamond cutting: review and outlook
International Journal of Extreme Manufacturing 2023, 5(2): 022001
Published: 23 February 2023
Abstract PDF (17.3 MB) Collect
Downloads:32

Ultra-precision diamond cutting is a promising machining technique for realizing ultra-smooth surface of different kinds of materials. While fundamental understanding of the impact of workpiece material properties on cutting mechanisms is crucial for promoting the capability of the machining technique, numerical simulation methods at different length and time scales act as important supplements to experimental investigations. In this work, we present a compact review on recent advancements in the numerical simulations of material-oriented diamond cutting, in which representative machining phenomena are systematically summarized and discussed by multiscale simulations such as molecular dynamics simulation and finite element simulation: the anisotropy cutting behavior of polycrystalline material, the thermo-mechanical coupling tool-chip friction states, the synergetic cutting responses of individual phase in composite materials, and the impact of various external energetic fields on cutting processes. In particular, the novel physics-based numerical models, which involve the high precision constitutive law associated with heterogeneous deformation behavior, the thermo-mechanical coupling algorithm associated with tool-chip friction, the configurations of individual phases in line with real microstructural characteristics of composite materials, and the integration of external energetic fields into cutting models, are highlighted. Finally, insights into the future development of advanced numerical simulation techniques for diamond cutting of advanced structured materials are also provided. The aspects reported in this review present guidelines for the numerical simulations of ultra-precision mechanical machining responses for a variety of materials.

Open Access Paper Issue
The interaction between grain boundary and tool geometry in nanocutting of a bi-crystal copper
International Journal of Extreme Manufacturing 2019, 1(4): 045001
Published: 28 October 2019
Abstract PDF (4.2 MB) Collect
Downloads:79

Anisotropy is one central influencing factor on achievable ultimate machined surface integrity of metallic materials. Specifically, grain boundary has a strong impact on the deformation behaviour of polycrystalline materials and correlated material removal at the microscale. In the present work, we perform molecular dynamics simulations and experiments to elucidate the underlying grain boundary-associated mechanisms and their correlations with machining results of a bi-crystal Cu under nanocutting using a Berkovich tool. Specifically, crystallographic orientations of simulated bi-crystal Cu with a misorientation angle of 44.1° are derived from electron backscatter diffraction characterization of utilized polycrystalline copper specimen. Simulation results reveal that blocking of dislocation motion at grain boundaries, absorption of dislocations by grain boundaries and dislocation nucleation from grain boundaries are operating deformation modes in nanocutting of the bi-crystal Cu. Furthermore, heterogeneous grain boundary-associated mechanisms in neighbouring grains lead to strong anisotropic machining behaviour in the vicinity of the grain boundary. Simulated machined surface morphology and machining force evolution in the vicinity of grain boundary qualitatively agree well with experimental results. It is also found that the geometry of Berkovich tool has a strong impact on grain boundary-associated mechanisms and resultant ploughing-induced surface pile-up phenomenon.

Total 4