AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (45.1 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

Atomistic investigation of effect of twin boundary on machinability in diamond cutting of nanocrystalline 3C-SiC

Liang Zhao1, Weimian Guan1, Jiwen Xu1, Zhiyuan Sun1, Maoda Zhang1, Junjie Zhang2 ( )
Shenyang Aircraft Industry (Group) Co., Ltd., Shenyang 110850, China
Center for Precision Engineering, Harbin Institute of Technology, Harbin 150001, China
Show Author Information

Abstract

The machinability of hard brittle nanocrystalline cubic silicon carbide (3C-SiC) is strongly dependent on internal microstructure and its adapted machining response. Here, we conducted molecular dynamic simulations to explore the machinability of nanotwinned 3C-SiC with a large number of twin boundaries in diamond cutting. The effect of the introduction of twin boundaries on the diamond cutting of nanocrystalline 3C-SiC, particular for its contribution to suppressing brittle fracture and improving ductile-mode cutting, was investigated in-depth. Our simulation results revealed that twin boundaries exerted a significant impact on the deformation mechanism and subsequent surface integrity of nanocrystalline 3C-SiC. Specifically, intergranular fracture was significantly suppressed by the introduction of twin boundaries. In addition, various deformation behaviors such as phase transformation, crack propagation, dislocation activity, and twin boundary-associated deformation mechanisms were operated in cutting process of nanotwinned 3C-SiC. Furthermore, the influence of twin boundary spacing on the diamond cutting characteristics of nanotwinned 3C-SiC was also addressed.

References

【1】
【1】
 
 
AIMS Materials Science
Pages 1149-1164

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Zhao L, Guan W, Xu J, et al. Atomistic investigation of effect of twin boundary on machinability in diamond cutting of nanocrystalline 3C-SiC. AIMS Materials Science, 2024, 11(6): 1149-1164. https://doi.org/10.3934/matersci.2024056

2767

Views

135

Downloads

2

Crossref

2

Web of Science

2

Scopus

Received: 30 September 2024
Revised: 05 December 2024
Accepted: 09 December 2024
Published: 12 December 2024
©2024 the Author(s), licensee AIMS Press.

This is an open access article distributed under the terms of the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0)