Sort:
Open Access Research paper Issue
Effect of microstructural characteristics on thermomechanical properties of thermal barrier coatings
Journal of Aeronautical Materials 2026, 46(11): 110-119
Published: 15 November 2026
Abstract PDF (5.9 MB) Collect
Downloads:0

Thermal barrier coatings (TBCs) play an important role in high-temperature protection, and their microstructural characteristics significantly influence thermal insulation performance and mechanical behavior. In this work, high-resolution X-ray computed tomography and three-dimensional reconstruction are used to construct a microstructural model of TBCs incorporating realistic pore distributions and rough interfaces. Comparative models with varying microstructural parameters are also developed. Coupled thermomechanical finite element analysis is performed to investigate the effects of interface morphology, porosity, and pore size on temperature and stress distributions. The results show that increasing interface roughness intensifies local stress concentrations and reduces the thermal insulation performance of the coating. Increasing porosity improves thermal insulation and reduces both the maximum and mean equivalent stresses. At a constant porosity, increasing pore size slightly improves thermal insulation while causing a small increase in equivalent stress. This work clarifies the effects of microstructural parameters on heat transfer and thermal stress distributions in TBCs, providing a theoretical basis for the quantitative optimization of TBC microstructures and guidance for improving their reliability in service.

Open Access Research Article Issue
The effect of cell aspect ratio on flow and heat transfer characteristics of anisotropic Kelvin foam
Acta Aerodynamica Sinica 2024, 42(1): 55-66
Published: 17 August 2023
Abstract PDF (3.5 MB) Collect
Downloads:6

High-porosity foam materials are widely used in aircraft thermal management systems due to their light weight and large surface area. The optimization of the geometric parameters in pore scale is crucial for effectively improving the overall heat transfer performance and reducing the structural weight. This paper focuses on anisotropic Kelvin foam structures and uses a hybrid lattice Boltzmann method and multi-GPU acceleration technology to perform conjugate heat transfer numerical simulations that considers both foam skeleton conduction and forced convection heat transfer in the pores on the pore scale. Different cell aspect ratios (H/D = 0.5, 0.75, 1.0, 1.5, 2.0) were selected with various Reynolds numbers (Re = 10, 100, 1000) to study the effect of cell aspect ratio on flow and heat transfer characteristics. The results show that under different Re conditions, as the H/D of the anisotropic Kelvin foam decreases, the flow resistance and Nusselt number inside the foam increase. As the Reynolds number increases, the effect of convective heat transfer becomes stronger, and the influence of H/D becomes more significant. In addition, compared with flow resistance, the structural heat transfer performance changes more rapidly with H/D, and therefore, the comprehensive heat transfer factor is inversely proportional to H/D, which means reducing the H/D of Kelvin foams can effectively improve the overall heat transfer performance of foam structure.

Total 2