Sort:
Open Access Full Length Article Issue
A numerical simulation strategy for a compressor’s underlying axisymmetric characteristic and its application in body force model
Chinese Journal of Aeronautics 2024, 37(8): 79-90
Published: 30 January 2024
Abstract Collect

Accurate prediction of the aerodynamic response of a compressor under inlet distortion is crucial for next-generation civil aircraft, such as Boundary Layer Ingestion (BLI) silent aircraft. Therefore, research on the Body Force (BF) model plays a significant role in achieving this objective. However, distorted inlet airflow can lead to varying operating conditions across different spatial locations of the compressor, which may cause some regions to operate outside the stability boundary. Consequently, the accuracy of BF model simulations might be compromised. To address this issue, this paper proposes a numerical simulation strategy for acquiring the steady axisymmetric three-dimensional flow field of a compressor operating at low mass flow rates, which is known as the Underlying Axisymmetric Pressure Rise Characteristic (UAPRC). The proposed simulation accounts for two different rotor speeds of a transonic compressor and identifies initial positions in the flow field where deterioration occurs based on prior experimental investigations. Moreover, simulation results are incorporated into the BF model to replicate hub instability observed in experiments. Obtained results demonstrate that this strategy provides valid predictions of the UAPRC of the compressor, thereby addressing the limitations associated with the BF model.

Open Access Full Length Article Issue
A modified streamwise body force model of fan with distorted inflow for rapid propulsion-airframe integrated simulation
Chinese Journal of Aeronautics 2023, 36(12): 202-213
Published: 14 August 2023
Abstract Collect

Streamwise Body Force Model (SBFM) could be used to simulate the force of blade on the airflow, resulting in rapid propulsion-airframe integrated simulation. However, when subjected to inlet distortion, the upstream flow field of fan stage is redistributed, which causes inaccurate prediction of fan stage performance. As inspired by the upstream influence of compressor, this paper aims to present a modification strategy for SBFM method to predict the compressor performance under circumferential inlet distortion without any knowledge of compressor geometry. Based on the linearized motion equation, the Upstream Influence Model (UIM) is introduced to predict the upstream flow field redistribution. Then the theoretical Mach number at Aerodynamic Interface Plane (AIP) position is calculated and selected to determine the corresponding body force coefficients based on the functional relationship between body force coefficients and Mach number, thus the upstream influence of compressor could be accurately quantified and the Modified Streamwise Body Force Model (MSBFM) could be established. Two studied cases are calculated with different methods and the upstream flow fields are analyzed. The prediction error of MSBFM method for compressor adiabatic efficiency is less than 3%, and the calculation efficiency is improved 20 times under the condition of ensuring computing accuracy. The MSBFM method has the potential for rapid propulsion-airframe integrated simulation.

Total 2