AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Full Length Article | Open Access

A modified streamwise body force model of fan with distorted inflow for rapid propulsion-airframe integrated simulation

Zhiping LIa,b, Yafei ZHANGa,c, Tianyu PANa,b( ), Jian ZHANGc
National Key Laboratory of Science and Technology on Aero-Engine Aero-Thermodynamics, Beihang University, Beijing 100191, China
Research Institute of Aero-Engine, Beihang University, Beijing 100191, China
School of Energy and Power Engineering, Beihang University, Beijing 100191, China

Peer review under responsibility of Editorial Committee of CJA.

Show Author Information

Abstract

Streamwise Body Force Model (SBFM) could be used to simulate the force of blade on the airflow, resulting in rapid propulsion-airframe integrated simulation. However, when subjected to inlet distortion, the upstream flow field of fan stage is redistributed, which causes inaccurate prediction of fan stage performance. As inspired by the upstream influence of compressor, this paper aims to present a modification strategy for SBFM method to predict the compressor performance under circumferential inlet distortion without any knowledge of compressor geometry. Based on the linearized motion equation, the Upstream Influence Model (UIM) is introduced to predict the upstream flow field redistribution. Then the theoretical Mach number at Aerodynamic Interface Plane (AIP) position is calculated and selected to determine the corresponding body force coefficients based on the functional relationship between body force coefficients and Mach number, thus the upstream influence of compressor could be accurately quantified and the Modified Streamwise Body Force Model (MSBFM) could be established. Two studied cases are calculated with different methods and the upstream flow fields are analyzed. The prediction error of MSBFM method for compressor adiabatic efficiency is less than 3%, and the calculation efficiency is improved 20 times under the condition of ensuring computing accuracy. The MSBFM method has the potential for rapid propulsion-airframe integrated simulation.

References

【1】
【1】
 
 
Chinese Journal of Aeronautics
Pages 202-213

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
LI Z, ZHANG Y, PAN T, et al. A modified streamwise body force model of fan with distorted inflow for rapid propulsion-airframe integrated simulation. Chinese Journal of Aeronautics, 2023, 36(12): 202-213. https://doi.org/10.1016/j.cja.2023.08.007

794

Views

9

Crossref

0

Web of Science

9

Scopus

3

CSCD

Received: 13 December 2022
Revised: 09 January 2023
Accepted: 28 April 2023
Published: 14 August 2023
© 2023 Chinese Society of Aeronautics and Astronautics.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).