Enhanced oil recovery in tight reservoirs requires reliable laboratory methods for evaluating the impact of interfacial phenomena on pore-scale displacement processes. Conventional interfacial tension measurements are often difficult to apply under high-pressure conditions, particularly when the fluid interface is unstable or when one phase tends to dissolve into another. In this study, a microfluidic methodology was developed for combined evaluation of interfacial tension and gas displacement efficiency. The approach was first validated using model fluid systems at elevated pressure and temperature. The lowest deviation from the literature values was obtained for the decane-water system, whereas larger deviations observed for gas-liquid systems were attributed to the simplified chip geometry and possible differences in experimental conditions. Further experiments were conducted using recombined crude oil and three injection gases: Nitrogen, methane, and associated petroleum gas. Under reservoir-relevant conditions, the mean microfluidic interfacial tension values followed a distinct ranking with nitrogen exhibiting the highest value, methane intermediate, and associated petroleum gas the lowest. This ordering was consistent with the pendant-drop measurements and was interpreted as an experimental validation of the observed trend. The corresponding displacement efficiencies showed an inverse pattern, with the lowest efficiency for nitrogen and the highest for associated petroleum gas. The results indicate that the combined microfluidic workflow can serve as a rapid comparative screening tool for gas enhanced oil recovery applications.
Publications
- Article type
- Year
- Co-author
Article type
Year
Open Access
Original Article
Issue
Capillarity 2026, 20(1): 3-13
Published: 12 June 2026
Downloads:0
Total 1
京公网安备11010802044758号