Enhanced oil recovery in tight reservoirs requires reliable laboratory methods for evaluating the impact of interfacial phenomena on pore-scale displacement processes. Conventional interfacial tension measurements are often difficult to apply under high-pressure conditions, particularly when the fluid interface is unstable or when one phase tends to dissolve into another. In this study, a microfluidic methodology was developed for combined evaluation of interfacial tension and gas displacement efficiency. The approach was first validated using model fluid systems at elevated pressure and temperature. The lowest deviation from the literature values was obtained for the decane-water system, whereas larger deviations observed for gas-liquid systems were attributed to the simplified chip geometry and possible differences in experimental conditions. Further experiments were conducted using recombined crude oil and three injection gases: Nitrogen, methane, and associated petroleum gas. Under reservoir-relevant conditions, the mean microfluidic interfacial tension values followed a distinct ranking with nitrogen exhibiting the highest value, methane intermediate, and associated petroleum gas the lowest. This ordering was consistent with the pendant-drop measurements and was interpreted as an experimental validation of the observed trend. The corresponding displacement efficiencies showed an inverse pattern, with the lowest efficiency for nitrogen and the highest for associated petroleum gas. The results indicate that the combined microfluidic workflow can serve as a rapid comparative screening tool for gas enhanced oil recovery applications.
- Article type
- Year
- Co-author
Open Access
Original Article
Issue
Open Access
Original Article
Issue
This study presents an integrated, multi-scale laboratory workflow designed specifically for organic-rich shales using multistage solvent extraction. Applied to oil shales of the Bazhenov Formation of varying maturity and lithology, the key unconventional play in Western Siberia, it enables the construction of a robust, volumetric fluid saturation model. The workflow combines mineralogical characterization, conventional core testing, low-field nuclear magnetic resonance relaxometry, high-resolution X-ray computed microtomography, Rock-Eval pyrolysis, and sequential saturates, aromatics, resins, and asphaltenes fractionation following a three-stage solvent extraction protocol. The core analysis following three-step extraction provides new insights into the interplay between lithology, pore system architecture, and fluid distribution mechanisms within tight, organically heterogeneous media. Key findings highlight that conventional methods often underestimate producible hydrocarbons trapped in kerogen nanopores and asphaltene aggregates, necessitating revised nuclear magnetic resonance interpretation approaches. Mechanically induced porosity, varying with organic matter maturity, is identified and linked to hydrocarbon release and matrix deformation. Combining nuclear magnetic resonance and gas porosity measurements provides a rapid, accurate porosity estimation method with minimal sample alteration. Finally, a conceptual fluid physical model is proposed to better interpret nuclear magnetic resonance data and pore-scale fluid dynamics in similar oil shales. The refined methodology of express core assessment significantly improves industry conventional practices by enabling a more precise and physically meaningful quantification of in-situ fluid saturation, including differentiation between bound heavy hydrocarbons and mobile fractions. Beyond advancing the fundamental understanding of fluid saturation and storage capacity in unconventional systems, this framework supports improved reservoir characterization and modeling efforts.
京公网安备11010802044758号