Subsurface hydrogen generation encompasses both natural and engineered processes. Natural subsurface hydrogen, often referred to as geological hydrogen, is produced by in-situ geochemical reactions without human intervention. The term engineered subsurface hydrogen generation is adopted here to describe controllable reservoir operations aimed at producing hydrogen, which can be further divided into three routes, namely stimulated geological hydrogen via serpentinization of ultramafic rocks by water-looping, subsurface chemical looping via steel-slag-mediated iron redox water splitting, and subsurface conversion of organic-rich formations via thermal, biological, or chemical pathways. Only stimulated geological hydrogen falls within the strict definition of geological hydrogen; the other two are engineered subsurface processes that do not qualify as geological hydrogen. Our experiments on serpentinization indicate that hydrogen generation and release can be physically decoupled, implying that engineered production strategies such as pressure drawdown and cyclic injection-production are required. Crucially, the field value of engineered subsurface hydrogen generation depends on whether these hydrogen-generating reactions can be engineered as controllable reservoir operations. These routes therefore require reaction-specific production systems rather than a universal well pattern. Drawing on geothermal doublets, multistage-fractured horizontal wells, radial jet laterals, shock fracturing and blasting fracturing, a completion-centered framework is outlined in which wellbores, fractures, catalysts or reactive solids, renewable heating, hydrogen separation and underground storage are designed as one production system. Key questions are further identified, including reaction kinetics coupled with heat and mass transfer, catalyst and injectivity maintenance, and pilot evaluation by H2 recovery, energy output-input ratio and carbon balance.
- Article type
- Year
- Co-author
Open Access
Editorial
Issue
Open Access
Original Article
Issue
In CO2-enhanced shale oil recovery process, the low viscosity of CO2 often leads to premature gas breakthrough, compromising sweep efficiency. Previous work demonstrated that 12-hydroxystearic acid and dimethyl sulfoxide can increase bulk CO2 viscosity, yet the behavior of this formulation in water-bearing clay nanopores remains unclear. Molecular dynamics simulations and density functional theory calculations were combined to examine phase partitioning, near-surface interactions, and nanoscale apparent wettability in hydrated illite slit pores. As temperature and CO2 loading increased, dimethyl sulfoxide-water hydrogen bonding decreased, which drove more dimethyl sulfoxide to remain in the main CO2-rich cluster. Within the same hydrated pore, the two formulation components exhibited distinct near-surface dynamics: dimethyl sulfoxide underwent frequent, short-lived residence events, whereas 12-hydroxystearic acid showed fewer but longer water-mediated events. The prolonged residence of 12-hydroxystearic acid was associated with its stronger affinity for the hydrated illite interface. However, surface hydration prevented the carboxyl headgroup from persistent contact anchoring to the interface, as revealed by free-energy and density functional theory calculations. The stronger affinity thus originated from hydrocarbon-chain dispersion rather than carboxyl-group electrostatics, as further indicated by interaction-energy decomposition. The formulation also altered wettability at the nanoscale, as evidenced by a lower water-mediated apparent contact angle. This reduction resulted from the broadening of the oil-water interface and its increased positional fluctuations, caused by dimethyl sulfoxide enrichment at the interface and the three-phase contact line. These findings provide a molecular basis for understanding the behavior of the previously demonstrated CO2-thickening formulation after it enters water-bearing illite nanopores.
Open Access
Original Article
Issue
Shale oil recovery is constrained by oil retention in nanopore networks and at mineral-organic interfaces. Supercritical CO2 injection has been explored as an enhanced recovery method because it can enter confined pore spaces and interact favorably with shale oil. However, the low viscosity of CO2 limits its mobility control ability, resulting in low sweep efficiency. Thickening CO2 with suitable thickeners is therefore a practical strategy to address this limitation. In this study, high-pressure visual observations, viscosity calculations, and molecular dynamics simulations were combined to evaluate the performance of CO2 thickened with 12-hydroxystearic acid and dimethyl sulfoxide, with emphasis on bulk viscosity, phase compatibility, interfacial partitioning, and confined transport in a mixed-wet kerogen-illite nanopore. High-pressure visual observations confirm the formation of a stable CO2-rich phase under elevated pressure, and viscosity calculations show a higher viscosity than neat supercritical CO2. Molecular dynamics simulations reveal that dimethyl sulfoxide and 12-hydroxystearic acid preferentially accumulate near the kerogen-illite walls rather than in the pore interior. This near-wall partitioning modifies the local wall-fluid environment and introduces competitive adsorption with oil components. Interaction-energy analysis indicates that the improved oil-mobilization tendency is associated with weakened wall-oil adhesion rather than enhanced direct CO2-oil attraction. As a result, near-wall retained oil becomes less dominated by wall adhesion and more susceptible to CO2-assisted mobilization. Diffusion analysis shows that the thickened formulation reduces the diffusive mobility of oil components while preserving in-plane CO2 transport. These findings suggest that thickened CO2 may improve shale oil recovery through a coupled rheological-interfacial mechanism.
京公网安备11010802044758号