AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (119.2 KB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Editorial | Open Access

Engineered subsurface hydrogen generation: Insights for sustainable production system

State Key Laboratory of Petroleum Resources and Engineering, China University of Petroleum, Beijing 102249, P. R. China
State Key Laboratory of Heavy Oil Processing, China University of Petroleum, Beijing 102249, P. R. China
Center for Petroleum Science and Engineering, Skolkovo Institute of Science and Technology, Moscow 121205, Russia
Show Author Information

Abstract

Subsurface hydrogen generation encompasses both natural and engineered processes. Natural subsurface hydrogen, often referred to as geological hydrogen, is produced by in-situ geochemical reactions without human intervention. The term engineered subsurface hydrogen generation is adopted here to describe controllable reservoir operations aimed at producing hydrogen, which can be further divided into three routes, namely stimulated geological hydrogen via serpentinization of ultramafic rocks by water-looping, subsurface chemical looping via steel-slag-mediated iron redox water splitting, and subsurface conversion of organic-rich formations via thermal, biological, or chemical pathways. Only stimulated geological hydrogen falls within the strict definition of geological hydrogen; the other two are engineered subsurface processes that do not qualify as geological hydrogen. Our experiments on serpentinization indicate that hydrogen generation and release can be physically decoupled, implying that engineered production strategies such as pressure drawdown and cyclic injection-production are required. Crucially, the field value of engineered subsurface hydrogen generation depends on whether these hydrogen-generating reactions can be engineered as controllable reservoir operations. These routes therefore require reaction-specific production systems rather than a universal well pattern. Drawing on geothermal doublets, multistage-fractured horizontal wells, radial jet laterals, shock fracturing and blasting fracturing, a completion-centered framework is outlined in which wellbores, fractures, catalysts or reactive solids, renewable heating, hydrogen separation and underground storage are designed as one production system. Key questions are further identified, including reaction kinetics coupled with heat and mass transfer, catalyst and injectivity maintenance, and pilot evaluation by H2 recovery, energy output-input ratio and carbon balance.

References

【1】
【1】
 
 
Advances in Geo-Energy Research
Pages 297-300

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Wang B, Wang H, Li G, et al. Engineered subsurface hydrogen generation: Insights for sustainable production system. Advances in Geo-Energy Research, 2026, 21(3): 297-300. https://doi.org/10.46690/ager.2026.09.08

10

Views

1

Downloads

0

Crossref

0

Web of Science

0

Scopus

Received: 05 August 2026
Revised: 19 August 2026
Accepted: 05 September 2026
Published: 07 September 2026
© The Author(s) 2026.

This article is distributed under the terms and conditions of the Creative Commons Attribution (CC BY-NC-ND) license, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.