Magnesium hydride (MgH2) is a promising solid-state hydrogen carrier, yet its practical application is hindered by sluggish kinetics and a high dehydrogenation temperature. Herein, Ni single atoms supported on N-doped carbon (Ni/NC) are constructed to clarify the catalytic roles of Ni and NC and the underlying interfacial mechanism. The nano-Mg@Ni/NC composite absorbs 6.12 wt% H2 within 1000 s at 200 °C and releases 6.42 wt% within 500 s at 325 °C, with absorption and desorption activation energies of 30.18 and 82.14 kJ mol-1, respectively. Its onset dehydrogenation temperature is 205 °C, and 97.8% of the initial capacity is retained after 10 cycles. DFT calculations reveal that interfacial electronic coupling at the Ni-N4/MgH2 interface drives charge transfer, weakens Mg-H bonds, and lowers the dehydrogenation energy barrier. These results distinguish Ni-N4 sites as electronic modulators and NC as a conductive support. HAADF-STEM/EDS and XPS analyses of the as-milled, hydrogenated, and dehydrogenated samples demonstrate highly dispersed Ni single atoms and largely preserved Ni-N4 features. This work establishes interfacial electronic coupling as an effective strategy for advanced Mg-based hydrogen storage.
- Article type
- Year
- Co-author
Open Access
Research Article
Just Accepted
Open Access
Research Article
Issue
Hybrid capacitive deionization (HCDI) shows promise for desalinating brackish and saline water by utilizing the pseudocapacitive properties of faradaic electrodes. Organic materials, with their low environmental impact and adaptable structures, are attractive for this application. However, their scarcity of active sites and tendency to dissolve in water-based solutions remain significant challenges. Herein, we synthesized a polynaphthalenequinoneimine (PCON) polymer with stable long-range ordered framework and rough three-dimensional floral surface morphology, along with high-density active sites provided by C=O and C=N functional groups, enabling efficient redox reactions and achieving a high Na+ capture capability. The synthesized PCON polymer showcases outstanding electroadsorption characteristics and notable structural robustness, attaining an impressive specific capacitance of 500.45 F g−1 at 1 A g−1 and maintaining 86.1% of its original capacitance following 5000 charge–discharge cycles. Benefiting from the superior pseudocapacitive properties of the PCON polymer, we have developed an HCDI system that not only exhibits exceptional salt removal capacity of 100.8 mg g−1 and a remarkable rapid average removal rate of 3.36 mg g−1 min−1 but also maintains 97% of its initial desalination capacity after 50 cycles, thereby distinguishing itself in the field of state-of-the-art desalination technologies with its comprehensive performance that significantly surpasses reported organic capacitive deionization materials. Prospectively, the synthesis paradigm of the double active-sites PCON polymer may be extrapolated to other organic electrodes, heralding new avenues for the design of high-performance desalination systems.
京公网安备11010802044758号