AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (2.6 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

Highly Efficient and Stable Capacitive Deionization Based on a Flower-Like Conjugated Polymer with Double Active-Sites

Zhiyun Zhuang1, Lei Sun1,2, Yueheng Tao3, Jian Shao1, Jinggang Yang1, Peng Yu2, Huanxu Chen2, Jianhua Zhou1, Jing Xiao2, Kangyong Yin1, Minjie Shi3( ), Peng Xiao1,4 ( )
State Grid Jiangsu Electric Power Co., Ltd., Research Institute, Nanjing 211103, China
State Grid Jiangsu Electric Power Co., Ltd., Nanjing 210000, China
School of Materials Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003, China
Institute of Functional Nano & Soft Materials (FUNSOM), Soochow University, Suzhou 215213, China
Show Author Information

Abstract

Hybrid capacitive deionization (HCDI) shows promise for desalinating brackish and saline water by utilizing the pseudocapacitive properties of faradaic electrodes. Organic materials, with their low environmental impact and adaptable structures, are attractive for this application. However, their scarcity of active sites and tendency to dissolve in water-based solutions remain significant challenges. Herein, we synthesized a polynaphthalenequinoneimine (PCON) polymer with stable long-range ordered framework and rough three-dimensional floral surface morphology, along with high-density active sites provided by C=O and C=N functional groups, enabling efficient redox reactions and achieving a high Na+ capture capability. The synthesized PCON polymer showcases outstanding electroadsorption characteristics and notable structural robustness, attaining an impressive specific capacitance of 500.45 F g−1 at 1 A g−1 and maintaining 86.1% of its original capacitance following 5000 charge–discharge cycles. Benefiting from the superior pseudocapacitive properties of the PCON polymer, we have developed an HCDI system that not only exhibits exceptional salt removal capacity of 100.8 mg g−1 and a remarkable rapid average removal rate of 3.36 mg g−1 min−1 but also maintains 97% of its initial desalination capacity after 50 cycles, thereby distinguishing itself in the field of state-of-the-art desalination technologies with its comprehensive performance that significantly surpasses reported organic capacitive deionization materials. Prospectively, the synthesis paradigm of the double active-sites PCON polymer may be extrapolated to other organic electrodes, heralding new avenues for the design of high-performance desalination systems.

Electronic Supplementary Material

Download File(s)
eem-8-3-e12852_ESM.docx (3.8 MB)

References

【1】
【1】
 
 
Energy & Environmental Materials

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Zhuang Z, Sun L, Tao Y, et al. Highly Efficient and Stable Capacitive Deionization Based on a Flower-Like Conjugated Polymer with Double Active-Sites. Energy & Environmental Materials, 2025, 8(3). https://doi.org/10.1002/eem2.12852

541

Views

0

Downloads

18

Crossref

21

Web of Science

21

Scopus

1

CSCD

Received: 20 July 2024
Revised: 20 September 2024
Published: 27 October 2024
© 2024 The Author(s).

This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.