Publications
Sort:
Issue
Preparation and Performance of Symmetrical Solid Oxide Cell with La0.8Ca1.2Fe0.9Co0.1O4-δ Electrode
Journal of Ceramics 2023, 44(1): 140-147
Published: 01 February 2023
Abstract PDF (5.7 MB) Collect
Downloads:9

La0.8Ca1.2Fe0.9Co0.1O4-δ (LCFC) perovskite oxides were prepared by using sol-gel method. Symmetrical solid oxide cells LCFC|GDC|YSZ|GDC|LCFC were assembled by using Y0.15Zr0.88O2-δ (YSZ) as the electrolyte, while LCFC was simultaneously used as the fuelelectrode and airelectrode and Gd0.1Ce0.9O2-δ (GDC) as a barrier to prevent the reaction between the electrode material and electrolyte. Phase structure and chemical stability of the LCFC material were studied by using X-ray diffraction method, high temperature electrical conductivity of the material was measured by using the four-probe method, and the thermal expansion coefficient of the material was also characterized. Electrochemical performance and stability of the symmetrical cell in fuel cell mode (SOFC) and electrolytic cell mode (SOEC) were evaluated, while the microstructure of the cell after testing was observed by scanning electron microscope. In SOFC mode, the maximum power density can reach 0.11 W·cm-2 at 850 ℃ with wet H2 as fuel and the electrolysis current density of pure CO2 electrolysis can reach 0.75 A·cm-2 at 850 ℃ and 2 V. Meanwhile, the cell has strong structural stability. Therefore, LCFC is a promising symmetrical cell electrode material.

Total 1