Sequential water flood simulation alternates implicit pressure solves with explicit saturation updates. This study examines, under ideal statevector access, how a solution state produced by the Harrow-Hassidim-Lloyd quantum linear system algorithm can be inserted into that sequential workflow for a two-phase model in one dimension. The evolving pressure systems are preconditioned from the left using rebuilt sparse approximate inverses, converted by Hermitian block dilation, and treated with signed phase estimation at finite resolution. The formulation also identifies the classical normalization, sign recovery, and complete field readout operations required before a solution state can drive the transport update. Steady and transient component tests precede coupled calculations on three successively refined grids. Across these grids, the statevector and direct pressure solutions remain closely aligned in direction, while the finest grid saturation trajectories show the largest difference and the statevector branch reaches the imposed upper saturation bound. Each plotted statevector pressure is aligned by a global scalar with the exact solution of its current dilated system, so the results assess algebraic data exchange rather than an independent reconstruction of physical pressure. A separate pilot covering five steps finds similar directional agreement between pressure solutions when a right sparse approximate inverse is rebuilt or updated using a sparse approximate map, but the combined setup and update time for recycling is markedly longer than the rebuilding time for this small problem. The results show that close directional agreement between pressure solutions does not by itself guarantee accurate saturation transport and thus provide a reference point for assessing such solvers in sequential reservoir simulation. All calculations use ideal statevectors; no quantum hardware, speedup of the complete workflow, or hardware advantage is demonstrated.
- Article type
- Year
- Co-author
Open Access
Original Article
Issue
Open Access
Original Paper
Issue
The phase behavior of gas condensate in reservoir formations differs from that in pressure–volume–temperature (PVT) cells because it is influenced by porous media in the reservoir formations. Sandstone was used as a sample to investigate the influence of porous media on the phase behavior of the gas condensate. The pore structure was first analyzed using computed tomography (CT) scanning, digital core technology, and a pore network model. The sandstone core sample was then saturated with gas condensate for the pressure depletion experiment. After each pressure-depletion state was stable, real-time CT scanning was performed on the sample. The scanning results of the sample were reconstructed into three-dimensional grayscale images, and the gas condensate and condensate liquid were segmented based on gray value discrepancy to dynamically characterize the phase behavior of the gas condensate in porous media. Pore network models of the condensate liquid ganglia under different pressures were built to calculate the characteristic parameters, including the average radius, coordination number, and tortuosity, and to analyze the changing mechanism caused by the phase behavior change of the gas condensate. Four types of condensate liquid (clustered, branched, membranous, and droplet ganglia) were then classified by shape factor and Euler number to investigate their morphological changes dynamically and elaborately. The results show that the dew point pressure of the gas condensate in porous media is 12.7 MPa, which is 0.7 MPa higher than 12.0 MPa in PVT cells. The average radius, volume, and coordination number of the condensate liquid ganglia increased when the system pressure was between the dew point pressure (12.7 MPa) and the pressure for the maximum liquid dropout, Pmax(10.0 MPa), and decreased when it was below Pmax. The volume proportion of clustered ganglia was the highest, followed by branched, membranous, and droplet ganglia. This study provides crucial experimental evidence for the phase behavior changing process of gas condensate in porous media during the depletion production of gas condensate reservoirs.
京公网安备11010802044758号