High Speed on/off Valve (HSV) is an essential component in Aerospace Digital Hydraulic Systems (ADHS), which impose stringent requirements on the dynamic performance and reliability of HSV due to the extreme application environments. However, the faster dynamic leads to increased impact between the spool and valve body, causing severe vibration and wear, which creates a conflict between rapid dynamic and high reliability. To address this problem, a Pre-Excitation Soft Switching Control (PESSC) with both pre-excitation and reverse deceleration functionalities is proposed. The initial current is optimized through pre-excitation to accelerate the opening time, while the application of reverse voltage hastens the decline of electromagnetic force, thereby reducing the spool velocity. The PESSC simultaneously achieves both faster dynamic performance and smaller impact velocity. Moreover, the optimal deceleration voltage parameters are obtained through multi-objective optimization. Experimental results demonstrate that the optimized PESSC shortens the opening time from 2.22 ms to 1.65 ms, reduces the impact velocity by 58.3%, and lowers wear by 55.4%. These findings underline the huge potential of PESSC in enhancing the dynamic performance and reliability of HSVs, offering promising applications in aerospace.
- Article type
- Year
Open Access
Issue
Open Access
Full Length Article
Issue
Hydraulic circuits with high speed on/off valve (HSV) for servo control have become commonplace in aerospace. However, the individual valve that is not volume-optimized results in a large total size of hydraulic control system, diminishing the practicality. To address this issue, the high-precision equivalent reluctance model of the HSV is established by employing an equivalent magnetic circuit, on which the dynamic characteristic of the HSV, as well as the effects of structural parameters on switching behaviour, are investigated. Based on this model, multi-objective optimization is adopted to design an HSV with faster dynamic performance and smaller volume, NSGA-Ⅱ genetic algorithm is applied to obtain the Pareto front of the desired objectives. To assess the impact before and after optimization, an HSV based on the optimized structure is manufactured and tested. The experimental results show that the optimized HSV reduces 47.1% of its solenoid volume while improving opening and closing dynamic performance by 14.8% and 43.0% respectively, increasing maximum switching frequency by 6.2%, and expanding flow linear control area by 6.7%. These results validate the optimized structure and indicate that the optimization method provided in the paper is beneficial for developing superior HSV.
Open Access
Full Length Article
Issue
High speed on/off valve (HSV) is an essential component in aerospace digital hydraulic systems (ADHS). Dynamic performance and temperature rising characteristic are two important features, which determine the performance of HSV, and affect the response speed and reliability of ADHS. Increasing the driving voltage is an effective method for improving the dynamic performance of HSV. However, continuous high voltage excitation will lead to more wasted energy, higher temperature rising and lower reliability. To solve this problem, a pre-excitation control algorithm (PECA) is proposed in this paper based on the theoretical model of the influence of electrical parameters on dynamic performance and temperature rising characteristics. In PECA, an appropriate initial coil current is generated by pre-excitation instead of increasing driving voltage, which significantly shortens the switching delay time. Then, based on real-time current online calculation and feedback mechanism, the adaptive switching of five equivalent voltages is realized. Consequently, the coil current can be rapidly kept at the expected state without consuming more energy and generating more heat. Results indicate that compared with conventional PWM control algorithm, the PECA can improve dynamic performance of HSV, shorten the total switching time by 71.5%, and increase the maximum operation frequency. Therefore, the linear area of flow characteristic is expended by 80.0%, the adjusting time of HSV-controlled system is reduced by 23%, while shortening steady error by 46.7%. Moreover, the temperature rising characteristics of HSV are better, the maximum operation temperature is reduced by 68.6%, and the time to reach the steady state temperature is shortened by 20%. From the results, it can be concluded that the PECA is not only an effective and practical control algorithm for improving the performance of HSVs and HSV-controlled systems while reducing the heat generation and decreasing the temperature rising of HSV, but also can be a potential solution in ADHS.
京公网安备11010802044758号