Publications
Sort:
Open Access Full Length Article Issue
Efficient cutting path planning for a non-spherical tool based on an iso-scallop height distance field
Chinese Journal of Aeronautics 2024, 37(7): 496-510
Published: 06 December 2023
Abstract Collect

Iso-scallop height machining means, when machining a freeform surface, the scallop height between any two neighboring tool paths on the surface will be a constant (i.e., the given threshold), which is preferable among various freeform surface machining strategies due to its high machining efficiency as well as better machine tool’s dynamics. However, all the existing iso-scallop height path planning methods pertain to only the ball-end or flat-end types of tools. In recent years, the non-spherical cutting tool has become more and more popular, especially for five-axis machining of complex freeform surfaces, majorly owing to its non-constant curvature which can be utilized to adaptively fit the tool to the surface to both avoid the local gouging and enlarge the cutting width. However, there have been no reported works on iso-scallop height five-axis tool path generation for a non-spherical tool, and, in this paper, we present one. Specifically, we first define and construct two fields on the surface to be machined-the collision-free tool orientation field (vector) and the iso-scallop height distance field (scalar). The iso-lines of the scalar field and their associated tool orientation field vectors then naturally serve as potential iso-scallop height five-axis tool paths, and we present a propagation-based algorithm to construct the desired tool path from the iso-lines. The computer simulation and physical cutting experiments confirm that everywhere on the surface, except maybe near the saddle curves of the scalar filed, the scallop height is exactly the given threshold. By adding the saddle curves as extra tool paths, the final machined surface then is assured of the required scallop height requirement.

Open Access Full Length Article Issue
Efficient machining of a complex blisk channel using a disc cutter
Chinese Journal of Aeronautics 2024, 37(1): 414-437
Published: 20 April 2023
Abstract Collect

For rough machining of a complex narrow cavity, e.g., a complex blisk channel on an aero-engine, the typically used cutting tools are the slender cylindrical cutter and conical cutter. Nevertheless, as neither of the two is particularly suited for rough machining, wherein the main purpose is to remove a large volume as quickly as possible, the machining efficiency is low, especially when the part materials are of hard-to-cut types (e.g., Titanium-alloy) for which it often takes days to rough machine a blisk. Fortunately, disc machining provides a new and efficient roughing solution, since a disc cutter with a large radius enables a much larger cutting speed and thus a larger material removal rate. However, due to the large radius of the disc cutter, its potential collision with narrow and twisted channels becomes a serious concern. In this paper, we propose a novel two-phase approach for efficiently machining a complex narrow cavity workpiece using a disc-shaped cutter, i.e., 3 + 2-axis disc-slotting of the channel by multiple layers (rough machining) + five-axis disc-milling of the freeform channel side surfaces (semi-finish machining). Both simulation and physical cutting experiments are conducted to assess the effectiveness and advantages of the proposed method. The experimental results show that, with respect to a same cusp-height threshold on the channel side surfaces, the total machining time of the tested part by the proposed method is about only 36% of that by the conventional approach of plunging-milling (for roughing) plus milling by a slender cylindrical cutter (for semi-finishing).

Total 2