This paper describes the orbit design of the deployable payload Rover 2 of MINERVA-II, installed on the Hayabusa2 spacecraft. Because Rover 2 did not have surface exploration capabilities, the operation team decided to experiment with a new strategy for its deployment to the surface. The rover was ejected at a high altitude and made a semi-hard landing on the surface of the asteroid Ryugu after several orbits. Based on the orbital analysis around Ryugu, the expected collision speed was tolerable for the rover to function post-impact. Because the rover could not control its position, its motion was entirely governed by the initial conditions. Thus, the largest challenge was to insert the rover into a stable orbit (despite its large release uncertainty), and avoid its escape from Ryugu due to an environment strongly perturbed by solar radiation pressure and gravitational irregularities. This study investigates the solution space of the orbit around Ryugu and evaluates the orbit’s robustness by utilizing Monte Carlo simulations to determine the orbit insertion policy. Upon analyzing the flight data of the rover operation, we verified that the rover orbited Ryugu for more than one period and established the possibility of a novel method for estimating the gravity of an asteroid.

The deep-space multi-object orbit determination system (DMOODS) and its application in the asteroid proximity operation of the Hayabusa2 mission are described. DMOODS was developed by the Japan Aerospace Exploration Agency (JAXA) for the primary purpose of determining the trajectory of deep-space spacecraft for JAXA’s planetary missions. The weighted least-squares batch filter is used for the orbit estimator of DMOODS. The orbit estimator supports more than 10 data types, some of which are used for relative trajectory measurements between multiple space objects including natural satellites and small bodies. This system consists of a set of computer programs running on Linux-based consumer PCs on the ground, which are used for orbit determination and the generation of radiometric tracking data, such as delta differential one-way ranging and doppler tracking data. During the asteroid proximity phase of Hayabusa2, this system played an essential role in operations that had very strict navigation requirements or operations in which few optical data were obtained owing to special constraints on the spacecraft attitude or distance from the asteroid. One example is orbit determination during the solar conjunction phase, in which the navigation accuracy is degraded by the effect of the solar corona. The large range bias caused by the solar corona was accurately estimated with DMOODS by combining light detection and ranging (LIDAR) and ranging measurements in the superior solar conjunction phase of Hayabusa2. For the orbiting operations of target markers and the MINERVA-II2 rover, the simultaneous estimation of six trajectories of four artificial objects and a natural object was made by DMOODS. This type of simultaneous orbit determination of multi-artificial objects in deep-space has never been accomplished before.