The Japanese interplanetary probe Hayabusa2 was launched on December 3, 2014 and the probe arrived at the vicinity of asteroid 162173 Ryugu on June 27, 2018. During its 1.4 years of asteroid proximity phase, the probe successfully accomplished numbers of record-breaking achievements including two touchdowns and one artificial cratering experiment, which are highly expected to have secured surface and subsurface samples from the asteroid inside its sample container for the first time in history. The Hayabusa2 spacecraft was designed not to orbit but to hover above the asteroid along the sub-Earth line. This orbital and geometrical configuration allows the spacecraft to utilize its high-gain antennas for telecommunication with the ground station on Earth while pointing its scientific observation and navigation sensors at the asteroid. This paper focuses on the regular station-keeping operation of Hayabusa2, which is called "home position" (HP)-keeping operation. First, together with the spacecraft design, an operation scheme called HP navigation (HPNAV), which includes a daily trajectory control and scientific observations as regular activities, is introduced. Following the description on the guidance, navigation, and control design as well as the framework of optical and radiometric navigation, the results of the HP-keeping operation including trajectory estimation and delta-
- Article type
- Year
- Co-author
In late 2018, the asteroid Ryugu was in the Sun’s shadow during the superior solar conjunction phase. As the Sun-Earth-Ryugu angle decreased to below 3
Subsurface exploration is one of the most ambitious scientific objectives of the Hayabusa2 mission. A small device called small carry-on impactor (SCI) was developed to create an artificial crater on the surface of asteroid Ryugu. This enables us to sample subsurface materials, which will provide a window to the past. The physical properties of the resulting crater are also useful for understanding the internal structure of Ryugu. Accurate understanding of the crater and ejecta properties, including the depth of excavation of subsurface materials, requires accurate information on impact conditions. In particular, the impact angle is a critical factor because it greatly influences the size and shape of the crater. On April 5, 2019, the Hayabusa2 spacecraft deployed the SCI at 500 m of altitude above the asteroid surface. The SCI gradually reduced its altitude, and it shot a 2 kg copper projectile into the asteroid 40 min after separation. Estimating the position of the released SCI is essential for determining the impact angle. This study describes the motion reconstruction of the SCI based on the actual operation data. The results indicate that the SCI was released with high accuracy.