Publications
Sort:
Open Access Research Article Issue
Movement pattern of an ellipsoidal nanoparticle confined between solid surfaces: Theoretical model and molecular dynamics simulation
Friction 2021, 9(5): 1098-1109
Published: 11 September 2020
Abstract PDF (6.3 MB) Collect
Downloads:92

The movement pattern of ellipsoidal nanoparticles confined between copper surfaces was examined using a theoretical model and molecular dynamics simulation. Initially, we developed a theoretical model of movement patterns for hard ellipsoidal nanoparticles. Subsequently, the simulation indicated that there are critical values for increasing the axial ratio, driving velocity of the contact surface, and lowering normal loads (i.e., 0.83, 15 m/s, and 100 nN under the respective conditions), which in turn change the movement pattern of nanoparticles from sliding to rolling. Based on the comparison between the ratio of arm of force (e/h) and coefficient of friction (μ), the theoretical model was in good agreement with the simulations and accurately predicted the movement pattern of ellipsoidal nanoparticles. The sliding of the ellipsoidal nanoparticles led to severe surface damage. However, rolling separated the contact surfaces and thereby reduced friction and wear.

Open Access Research Article Issue
Surface removal of a copper thin film in an ultrathin water environment by a molecular dynamics study
Friction 2020, 8(2): 323-334
Published: 02 March 2019
Abstract PDF (1.3 MB) Collect
Downloads:114

The surface planarity and asperity removal behavior on atomic scale in an ultrathin water environment were studied for a nanoscale process by molecular dynamics simulation. Monolayer atomic removal is achieved under both noncontact and monoatomic layer contact conditions with different water film thicknesses. The newly formed surface is relatively smooth without deformed layers, and no plastic defects are present in the subsurface. The nanoscale processing is governed by the interatomic adhering action during which the water film transmits the loading forces to the Cu surface and thereby results in the migration and removal of the surface atoms. When the scratching depth ≥ 0.5 nm, the abrasive particle squeezes out the water film from the scratching region and scratches the Cu surface directly. This leads to the formation of trenches and ridges, accumulation of chips ahead of the particles, and generation of dislocations within the Cu substrate. This process is mainly governed by the plowing action, leading to the deterioration of the surface quality. This study makes the "0 nm planarity, 0 residual defects, and 0 polishing pressure" in a nanoscale process more achievable and is helpful in understanding the nanoscale removal of materials for developing an ultra-precision manufacture technology.

Total 2