AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Home Friction Article
PDF (1.3 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

Surface removal of a copper thin film in an ultrathin water environment by a molecular dynamics study

Junqin SHI1, Liang FANG1,2( ), Kun SUN1( ), Weixiang PENG1, Juan GHEN1, Meng ZHANG1
State Key Laboratory for Mechanical Behavior of Materials, Xi’an Jiaotong University, Xi’an 710049, China
School of Mechanical and Electrical Engineering, Xiamen University Tan KahKee College, Zhangzhou 363105, China
Show Author Information

Abstract

The surface planarity and asperity removal behavior on atomic scale in an ultrathin water environment were studied for a nanoscale process by molecular dynamics simulation. Monolayer atomic removal is achieved under both noncontact and monoatomic layer contact conditions with different water film thicknesses. The newly formed surface is relatively smooth without deformed layers, and no plastic defects are present in the subsurface. The nanoscale processing is governed by the interatomic adhering action during which the water film transmits the loading forces to the Cu surface and thereby results in the migration and removal of the surface atoms. When the scratching depth ≥ 0.5 nm, the abrasive particle squeezes out the water film from the scratching region and scratches the Cu surface directly. This leads to the formation of trenches and ridges, accumulation of chips ahead of the particles, and generation of dislocations within the Cu substrate. This process is mainly governed by the plowing action, leading to the deterioration of the surface quality. This study makes the "0 nm planarity, 0 residual defects, and 0 polishing pressure" in a nanoscale process more achievable and is helpful in understanding the nanoscale removal of materials for developing an ultra-precision manufacture technology.

Electronic Supplementary Material

Download File(s)
40544_2019_258_MOESM1_ESM.pdf (2.2 MB)

References

【1】
【1】
 
 
Friction
Pages 323-334

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
SHI J, FANG L, SUN K, et al. Surface removal of a copper thin film in an ultrathin water environment by a molecular dynamics study. Friction, 2020, 8(2): 323-334. https://doi.org/10.1007/s40544-019-0258-6

2038

Views

114

Downloads

37

Crossref

N/A

Web of Science

39

Scopus

8

CSCD

Received: 16 August 2018
Revised: 31 October 2018
Accepted: 19 November 2018
Published: 02 March 2019
© The author(s) 2019

Open Access: The articles published in this journal are distributed under the terms of the Creative Commons Attribution 4.0 International License (http:// creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.