AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (8.8 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

Design and Realization of Landing–Moving Integrated Gear for Mobile Lunar Lander

Xianghua Zhou1,†, Cong Niu2,†, Shan Jia1,3,4( ), Jinbao Chen1,3,4, Vyacheslav Mikhailovich Devaev5, Jinhua Zhou6
Academy of Astronautics, Nanjing University of Aeronautics and Astronautics, Nanjing 211106, China
University of Strathclyde, Glasgow G1 1XQ, UK
Laboratory of Aerospace Entry, Descent and Landing Technology, Nanjing 211106, China
Key Laboratory of Detection Mechanism Technology for Deep-Space Planet Surface (Nanjing University of Aeronautics and Astronautics), Ministry of Industry and Information Technology, Nanjing 211106, China
Kazan National Research Technical University named after A.N. Tupolev-KAI, Kazan 420111, Russia
School of Mechanical Engineering, Shandong University, Jinan 250061, China

†These authors contributed equally to this work.

Show Author Information

Abstract

For the needs of manned landing, station construction, and material transfer in future lunar exploration missions, the paper proposes a landing–moving integrated gear (LMIG) for mobile lunar lander (MLL), establishes and optimizes the models of cushioning energy-absorbing and movement planning, respectively, and conducts the prototype tests. First, the design requirements of LMIG are given, and the system composition of LMIG and the configuration design of each subsystem are introduced. Second, the effective energy-absorbing model of the aluminum honeycomb is established and experimentally verified, a three-stage aluminum honeycomb buffer is designed and experimentally verified, and the buffer mechanism of LMIG is verified by simulations under various landing conditions. Furthermore, the kinematic and dynamic models of LMIG are established, the moving gait is designed by the center of gravity trajectory planning method, and the driving trajectory during the stepping process is optimized with the goal of minimal jerk of motion. Finally, a cushioning test prototype and a walking test scaled prototype of LMIG are developed, and single leg drop test and ground walking test are carried out. The results show that the established model of LMIG is reasonable, the designed buffer and gait of LMIG are effective, the developed prototypes of LMIG have good cushioning and movement performance, the LMIG’s maximum value of overload acceleration is 6.5g, and the moving speed is 108 m/h, which meets the design requirements.

References

【1】
【1】
 
 
Space: Science & Technology
Article number: 0169

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Zhou X, Niu C, Jia S, et al. Design and Realization of Landing–Moving Integrated Gear for Mobile Lunar Lander. Space: Science & Technology, 2024, 4: 0169. https://doi.org/10.34133/space.0169

3

Views

0

Downloads

0

Crossref

0

Web of Science

0

Scopus

Received: 25 October 2022
Accepted: 03 April 2024
Published: 05 August 2024
© 2024 Xianghua Zhou et al. Exclusive licensee Beijing Institute of Technology Press. No claim to original U.S. Government Works.

Distributed under a Creative Commons Attribution License 4.0 (CC BY 4.0).