Publications
Sort:
Open Access Research Article Issue
Design and Realization of Landing–Moving Integrated Gear for Mobile Lunar Lander
Space: Science & Technology 2024, 4: 0169
Published: 05 August 2024
Abstract PDF (8.8 MB) Collect
Downloads:0

For the needs of manned landing, station construction, and material transfer in future lunar exploration missions, the paper proposes a landing–moving integrated gear (LMIG) for mobile lunar lander (MLL), establishes and optimizes the models of cushioning energy-absorbing and movement planning, respectively, and conducts the prototype tests. First, the design requirements of LMIG are given, and the system composition of LMIG and the configuration design of each subsystem are introduced. Second, the effective energy-absorbing model of the aluminum honeycomb is established and experimentally verified, a three-stage aluminum honeycomb buffer is designed and experimentally verified, and the buffer mechanism of LMIG is verified by simulations under various landing conditions. Furthermore, the kinematic and dynamic models of LMIG are established, the moving gait is designed by the center of gravity trajectory planning method, and the driving trajectory during the stepping process is optimized with the goal of minimal jerk of motion. Finally, a cushioning test prototype and a walking test scaled prototype of LMIG are developed, and single leg drop test and ground walking test are carried out. The results show that the established model of LMIG is reasonable, the designed buffer and gait of LMIG are effective, the developed prototypes of LMIG have good cushioning and movement performance, the LMIG’s maximum value of overload acceleration is 6.5g, and the moving speed is 108 m/h, which meets the design requirements.

Issue
Configuration design and topology optimization of a single wing for the hybrid unmanned aerial vehicle
Journal of Tsinghua University (Science and Technology) 2023, 63(3): 423-432
Published: 15 March 2023
Abstract PDF (7.6 MB) Collect
Downloads:39
Objective

The hybrid unmanned aerial vehicle (UAV) has become an important technical means in the UAV field because of its excellent lift-drag characteristics and endurance. The endurance of an UAV can be improved mainly by obtaining good lift and drag characteristics and reducing its weight. Using a modular UAV as the research object, this paper established a hybrid UAV configuration concept, mainly considering the stress change rule and the maximum fatigue life of the monomer UAV under aerodynamic force, and its lightweight design goals under the fatigue life and the maximum stress constraint.

Methods

This paper conducted research on lightweight design mainly in three ways: 1) According to the hybrid UAV concept, an overall configuration of "main body + monomer" is proposed and the full-text research object is provided. The monomer UAV is an important task-combined UAV unit, so the mechanical properties of every single part and the overall topology structure are emphasized. 2) In the incompressible unsteady three-dimensional continuous equation and Navier-Stokes (N-S) equation, momentum analysis is carried out on the aerodynamic characteristics of a single wing UAV in a full working environment, the regional flight parameters are clarified, and the maximum aerodynamic force is selected as the ultimate load, in the form of loading a sine function into the single wing. The monomer stress distribution of the maximum stress region of the wing-body is extracted. Combined with Fe-safe numerical analysis software, fatigue life analysis is performed, and improvements are proposed for sensitive areas. Based on the service life guarantee and the solid isotropic microstructure with the penalization (SIMP) method, a topological optimization analysis of a single wing, load-bearing frame is performed. 3) A monomer wing finite element model is established to verify the correctness of the topology optimization model. For a single wing, all the structural analyses of the static and dynamic analysis results verify the correctness of the above theoretical analysis. At the same time, in the topology analysis link, because each tolerance beam differs in weight, analysis was performed for each beam.

Results

In this paper, based on the classic SIMP topology optimization method, the topological calculation and analysis of the single wing's front beam, middle beam, rear beam, and middle rib show that the weight of each beam is reduced by 5%, 10%, 5%, and 15%, respectively, under the premise of invariable mechanical distribution. After obtaining the analysis results, the weight of the entire wing is reduced by 35%. an innovative topology optimization process is adopted to analyze the fatigue life of key parts before the wing is joined, ensuring the process optimization of the wing and the service life of key parts. The proposed method integrates key position optimization, topology optimization, and fatigue life analysis, avoiding separate post-assembly fatigue analysis of key positions, optimizing the whole analysis process, and improving the work efficiency of lightweight analysis.

Conclusions

The wing topology optimization method under the fatigue life constraint proposed in this paper reduces the weight of a single UAV by 35% under the condition of constant force and improves the efficiency of wing lightweight analysis. The new analysis method provides technical support for subsequent UAV optimization analysis.

Total 2