AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (6.8 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Publishing Language: Chinese | Open Access

Analysis of the influence mechanism of preload variation on axial connection stiffness of clamp band joint

Baoshi YU1,2, Yongjun LEI1,2, Tao JIANG3, Hao LI3, Dapeng ZHANG1,2( )
College of Aerospace Science and Engineering, National University of Defense Technology, Changsha 410073, China
Hunan Key Laboratory of Intelligent Planning and Simulation for Aerospace Missions, Changsha 410073, China
Shanghai Institute of Aerospace Systems Engineering, Shanghai 201109, China
Show Author Information

Abstract

To accurately calculate the nonlinear bearing capacity of the CBJ (clamp band joint), through the mechanics behavior analysis of each component in the CBJ, a method for calculating the axial connection stiffness of the CBJ considering the change of preload was proposed. A fine finite element model was established considering the nonlinearity of the structure, and the accuracy of the finite element model was verified by axial tensile stiffness experiment. Combined with the finite element model, the theoretical calculation of the device connection stiffness was modified. Based on the established finite element and computational theoretical model, the influence mechanism of the distribution and variation of the belt tension and the initial belt preload on the device strength and connection stiffness was revealed. The results show that the stiffness calculation model can accurately calculate the axial connection stiffness of the device and predict the failure load of the connection, which has important engineering application value.

CLC number: V214.4; O344.7 Document code: A Article ID: 1001-2486(2025)01-113-13

References

【1】
【1】
 
 
Journal of National University of Defense Technology
Pages 113-125

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
YU B, LEI Y, JIANG T, et al. Analysis of the influence mechanism of preload variation on axial connection stiffness of clamp band joint. Journal of National University of Defense Technology, 2025, 47(1): 113-125. https://doi.org/10.11887/j.cn.202501011

798

Views

18

Downloads

0

Crossref

0

Web of Science

2

Scopus

1

CSCD

Received: 15 September 2022
Published: 28 February 2025
© 2025 Journal of National University of Defense Technology

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).