Zhang GJ, Ni DW, Zou J, et al. Inherent anisotropy in transition metal diborides and microstructure/property tailoring in ultra-high temperature ceramics—A review. J Eur Ceram Soc 2018, 38: 371-389.
Binner J, Porter M, Baker B, et al. Selection, processing, properties and applications of ultra-high temperature ceramic matrix composites, UHTCMCs—A review. Int Mater Rev 2020, 65: 389-444.
Tang SF, Hu CL. Design, preparation and properties of carbon fiber reinforced ultra-high temperature ceramic composites for aerospace applications—A review. J Mater Sci Technol 2017, 33: 117-130.
Chen BW, Ni DW, Liao CJ, et al. Long-term ablation behavior and mechanisms of 2D-Cf/ZrB2-SiC composites at temperatures up to 2400 ℃. Corros Sci 2020, 177: 108967.
Li LL, Wang YG, Cheng LF, et al. Preparation and properties of 2D C/SiC-ZrB2-TaC composites. Ceram Int 2011, 37: 891-896.
Ding Q, Ni DW, Wang Z, et al. Mechanical properties and microstructure evolution of 3D Cf/SiBCN composites at elevated temperatures. J Am Ceram Soc 2018, 101: 4699-4707.
Yan CL, Liu RJ, Zhang CR, et al. Effects of SiC/HfC ratios on the ablation and mechanical properties of 3D Cf/HfC-SiC composites. J Eur Ceram Soc 2017, 37: 2343-2351.
Jiang JM, Wang S, Li W, et al. Preparation of 3D Cf/ZrC-SiC composites by joint processes of PIP and RMI. Mater Sci Eng: A 2014, 607: 334-340.
Guo SQ. Thermal and electrical properties of hot-pressed short pitch-based carbon fiber-reinforced ZrB2-SiC matrix composites. Ceram Int 2013, 39: 5733-5740.
Shahedi Asl M, Golmohammadi F, Ghassemi Kakroudi M, et al. Synergetic effects of SiC and Csf in ZrB2-based ceramic composites. Part I: Densification behavior. Ceram Int 2016, 42: 4498-4506.
Nasiri Z, Mashhadi M, Abdollahi A. Effect of short carbon fiber addition on pressureless densification and mechanical properties of ZrB2-SiC-Csf nanocomposite. Int J Refract Met Hard Mater 2015, 51: 216-223.
Yunus DE, He R, Shi WT, et al. Short fiber reinforced 3d printed ceramic composite with shear induced alignment. Ceram Int 2017, 43: 11766-11772.
Das J, Kesava BC, Reddy JJ, et al. Microstructure, mechanical properties and oxidation behavior of short carbon fiber reinforced ZrB2-20v/oSiC-2v/oB4C composite. Mater Sci Eng: A 2018, 719: 206-226.
Zoli L, Vinci A, Silvestroni L, et al. Rapid spark plasma sintering to produce dense UHTCs reinforced with undamaged carbon fibres. Mater Des 2017, 130: 1-7.
Ren XR, Lv J, Li W, et al. Influence of MoSi2 on oxidation protective ability of TaB2-SiC coating in oxygen-containing environments within a broad temperature range. J Adv Ceram 2020, 9: 703-715.
He GQ, Guo RX, Li MS, et al. Microstructure and mechanical properties of short-carbon-fiber/Ti3SiC2 composites. J Adv Ceram 2020, 9: 716-725.
Gui KX, Hu P, Hong WH, et al. Microstructure, mechanical properties and thermal shock resistance of ZrB2-SiC-Cf composite with inhibited degradation of carbon fibers. J Alloys Compd 2017, 706: 16-23.
Chen XW, Ni DW, Kan YM, et al. Reaction mechanism and microstructure development of ZrSi2 melt-infiltrated Cf/SiC-ZrC-ZrB2 composites: The influence of preform pore structures. J Materiomics 2018, 4: 266-275.
Cao JW, Lu ZL, Miao K, et al. Investigation on microstructure control of in situ synthesized high-performance Cf/SiC composites. J Alloys Compd 2019, 805: 303-308.
Fei JJ, Wang WM, Ren AC, et al. Mechanical properties and densification of short carbon fiber-reinforced TiB2/C composites produced by hot pressing. J Alloys Compd 2014, 584: 87-92.
Zhang YM, Li S, Han JC, et al. Fabrication and characterization of random chopped fiber reinforced reaction bonded silicon carbide composite. Ceram Int 2012, 38: 1261-1266.
Sciti D, Pienti L, Natali Murri A, et al. From random chopped to oriented continuous SiC fibers-ZrB2 composites. Mater Des 2014, 63: 464-470.
Li S, Zhang YM, Han JC, et al. Random chopped fibers in reaction bonded SiC composite: Morphology, etching and reinforcing properties. Mater Sci Eng: A 2012, 551: 104-109.
Vinci A, Zoli L, Sciti D, et al. Understanding the mechanical properties of novel UHTCMCs through random forest and regression tree analysis. Mater Des 2018, 145: 97-107.
Sha JJ, Li J, Wang SH, et al. Improved microstructure and fracture properties of short carbon fiber-toughened ZrB2-based UHTC composites via colloidal process. Int J Refract Met Hard Mater 2016, 60: 68-74.
Tekinalp HL, Kunc V, Velez-Garcia GM, et al. Highly oriented carbon fiber-polymer composites via additive manufacturing. Compos Sci Technol 2014, 105: 144-150.
Stepashkin, Chukov DI, Senatov FS, et al. 3D-printed PEEK-carbon fiber (CF) composites: Structure and thermal properties. Compos Sci Technol 2018, 164: 319-326.
Franchin G, Wahl L, Colombo P. Direct ink writing of ceramic matrix composite structures. J Am Ceram Soc 2017, 100: 4397-4401.
Woods HJ. Contribution to the physics of cellulose fibres. Nature 1947, 159: 519-520.
McGee SH, McCullough RL. Characterization of fiber orientation in short-fiber composites. J Appl Phys 1984, 55: 1394-1403.
Chung DDL. Comparison of submicron-diameter carbon filaments and conventional carbon fibers as fillers in composite materials. Carbon 2001, 39: 1119-1125.
Wang BM, Zhang Y, Guo ZQ, et al. Dispersion of carbon nanofibers in aqueous solution. Nano 2012, 7: 1250052.
You X, Feng Q, Yang JS, et al. Preparation of high concentration graphene dispersion with low boiling point solvents. J Nanoparticle Res 2019, 21: 1-11.
Zhu CZ, Liu XF, Yu XL, et al. A small-angle X-ray scattering study and molecular dynamics simulation of microvoid evolution during the tensile deformation of carbon fibers. Carbon 2012, 50: 235-243.
Huang K, Yang JS, Dong SM, et al. Anisotropy of graphene scaffolds assembled by three-dimensional printing. Carbon 2018, 130: 1-10.
Ni DW, Wang JX, Dong SM, et al. Fabrication and properties of Cf/ZrC-SiC-based composites by an improved reactive melt infiltration. J Am Ceram Soc 2018, 101: 3253-3258.