The working surfaces of PEEK-coated sliding bearings in wind turbines are highly susceptible to severe friction and wear under specific operating conditions of low-speed and heavy-load. To improve the lubrication at the working interface, this paper proposes a novel textured structure inspired by the ink sac structure of cephalopods, adapted to the operating conditions and substrate materials of wind turbines. This new texture utilizes the significant deformation of the PEEK layer to transport lubricant, mimicking the ink-ejection behavior of cephalopods. Samples featuring this novel surface texture were fabricated using 3D printing technology, and a friction and wear test rig was constructed to verify its outstanding anti-friction performance. Under test conditions with the lowest rotational speed and the heaviest load, the coefficient of friction was reduced by 18% compared to that of a smooth specimen. A high-speed camera was used to capture the lubricant delivery process of the new texture under heavy-load conditions. The results demonstrate that the proposed texture exhibits significant oil-squeezing effects; after the system started up in dry-friction state, the coverage of the oily area increased by 63%, and the average grayscale value increased by 18%. Furthermore, the effects of texture shape parameters, texture density, and initial surface oil volume on performance were analyzed. This paper provides a reference for the surface texture design of highly elastic friction components under heavy-load conditions.
Publications
- Article type
- Year
Article type
Year
Open Access
Research Article
Just Accepted
Friction
Available online: 20 November 2026
Downloads:2
Total 1
京公网安备11010802044758号