Laser additive manufacturing (LAM), with its advantages of high design and manufacturing freedom and good formability, is gradually replacing conventional manufacturing methods for the fabrication of complex metal components. However, the pronounced temperature gradients and extremely high cooling rates during the LAM process render the as-built parts susceptible to hot cracking. Taking solution-strengthened nickel-based superalloys widely used in aerospace, such as Hastelloy X and Inconel 625, as the research subjects, this paper introduces the typical crack types in the LAM of such alloys, elucidates the formation mechanisms and influencing factors of solidification cracks and liquation cracks from the perspectives of dendrite growth, elemental segregation, and residual stress, and systematically summarizes the research progress in crack suppression with respect to material composition optimization, nanoparticle modification, process parameter optimization, in-situ process monitoring, and post-processing adjustment. In view of the current limitations, such as time-consuming and labor-intensive trial-and-error process optimization, an incomplete understanding of cracking mechanisms, and crack characterization largely confined to two dimensions, future research directions are outlined, including developing crack-free alloy composition systems by integrating thermodynamic calculation, high-throughput experiments, and machine learning; establishing multi-signal in-situ monitoring combined with machine learning for crack prediction; and deepening crack characterization by means of three-dimensional X-ray tomography.
Publications
- Article type
- Year
Article type
Year
Open Access
Review
Issue
Journal of Aeronautical Materials 2026, 46(11): 14-27
Published: 15 November 2026
Downloads:0
Total 1
京公网安备11010802044758号