Several groups of thermoplastic polyether ether ketone (PEEK) prepregs with different process parameters by adjusting the pretreatment temperature of carbon fiber are prepared, and the physicochemical properties, 0-degree tensile properties and microstructure of each group of thermoplastic prepregs are characterized. The results show that the pretreatment temperature of carbon fiber is increased from 300 ℃ to 450 ℃, and the 0° tensile strength of thermoplastic prepreg is increased from 1834.4 MPa to 2258.7 MPa, an increase of more than 20%. Meanwhile, the crystallization state of PEEK induced by heat-treated carbon fiber is observed by polarizing microscopy. Combined with test results of carbon fiber surface element distribution obtained via X-ray photoelectron spectroscopy (XPS), it is found that the heat-treated carbon fiber can significantly improve the tendency of PEEK heterogeneous nucleation, which has an impact on the crystallization process of PEEK.
Publications
- Article type
- Year
Article type
Year
Open Access
Research paper
Issue
Journal of Aeronautical Materials 2026, 46(11): 86-99
Published: 15 November 2026
Downloads:0
Total 1
京公网安备11010802044758号