Sort:
Open Access Research Article Online First
Electrical insulation enhancement of the Al2O3 composite films at high temperature by oxygen vacancy suppression
Journal of Advanced Ceramics
Published: 20 November 2026
Abstract PDF (10.8 MB) Collect
Downloads:51

Electrical insulation films are critical for the reliable operation of ultrahigh-temperature thin-film sensors (UTTSs) at elevated temperatures. However, the resistance of the insulation film easily declines at high temperatures due to the formation of oxygen vacancies and through-type defects, which will affect the long-term stability and reliability of the UTTSs. Here, we report a novel gas–liquid phase composite strategy to fabricate Al2O3 composite insulation films. An Al2O3 bottom film was first deposited by liquid-phase electrohydrodynamic jet printing, followed by the deposition of a dense Al2O3 film by magnetron sputtering. This design not only effectively repairs through-type defects in the liquid-phase film and improves overall densification but also suppresses the formation of oxygen vacancies in films. The gas-phase Al2O3 (G-Al2O3)/liquid-phase Al2O3 (L-Al2O3) composite film exhibits a smooth surface with substantially reduced microcracks and porosity. X-ray photoelectron spectroscopy reveals a significantly lower relative oxygen vacancy level in the composite films than in the pure L-Al2O3 film. Consequently, the G-Al2O3/L-Al2O3 film achieves an insulation resistance of 44 kΩ at 1400 °C, an order of magnitude higher than that of the pure L-Al2O3 film. In addition, three thermal cycles between 800 and 1200 °C demonstrate excellent repeatability of the insulation resistance within this temperature range. Practically, the Al2O3 composite films were applied to thin-film strain gauges (TFSGs), and the TFSGs exhibited excellent performance at high temperatures.

Total 1