Publications
Sort:
Open Access Issue
Study on the Working Properties of Integrated Support Structure of Precast Piles with Toothed Curtains
Chinese Journal of Underground Space and Engineering 2026, 22(4): 1362-1371
Published: 01 August 2026
Abstract PDF (5.8 MB) Collect
Downloads:0

The integrated support structure of precast pile with tooth curtain is a new type of unsupported support system formed by the precast pile implanted into the tooth curtain wall. The horizontal displacement changes of the slope top and pile top and the distribution characteristics of earth pressure behind the wall are studied and analyzed through the actual engineering field loading test, and the finite element numerical simulation is carried out. By comparing and analyzing the supporting performance of different supporting forms, the stress deformation rule and working mechanism of the integrated supporting structure of prefabricated pile with tooth curtain under different excavation depths are studied. The results show that: The integrated support structure of precast pile with tooth curtain can effectively limit the deformation of stratum and envelope structure, and the existence of tooth wall changes the stress deformation behavior of traditional cantilever pile wall support, and transfers and bears part of earth pressure through soil arch effect and side wall friction, which has an obvious load reduction effect. Compared with cantilever pile row support and pile row + curtain wall support, the integrated support structure of prefabricated curtain pile can greatly reduce the ground settlement, pile displacement and bending moment, improves the safety and stability of foundation pit support.

Issue
Load Transfer Calculation and Analysis of Large-Diameter Bored Piles According to Rules Based on Test Pile Measurement
Journal of Highway and Transportation Research and Development (English Edition) 2018, 12(3): 28-36
Published: 01 September 2018
Abstract PDF (1.5 MB) Collect
Downloads:8

This study aims to establish an appropriate method to calculate the bearing deformation of large-diameter bored piles in alluvial deposits with soils characterized mainly by medium-dense to dense silt, fine sand, and plastic to hard plastic silty clay in the middle and lower reaches of the Yellow River. According to the field measurement results of 18 large-diameter bored piles in six sites of the third-ring expressway project in Zhengzhou, this study discusses the action laws of pile shaft friction with pile-soil shear displacements and pile tip resistances with pile end displacements. A pile shaft load transfer model and pile tip bearing model are then established for large-diameter bored piles. The calculation parameter values are also given. The feasibility and rationality of the calculation method are verified by an engineering example. According to the engineering example and by changing the parameters of the pile diameter and pile length, the properties of bearing capacities and deformations of the large-diameter bored piles under this site condition are further analyzed. Results show that the inflection point of the pile Q~s curve is obvious for large pile diameters. The pile bearing capacity and deformation property are significantly improved by increasing the pile diameter under a small load. The increase amplitude of the pile bearing capacity and deformation property obviously decreases with the increase in pile length. This result indicates that the improvement of the pile bearing capacity and deformation property by increasing the pile length is not effective. The pile without grouting shows an obvious puncture damage model. Moreover, the settlement of the pile without grouting is small with a large pile diameter or short pile length. The effective length and bearing capacity of a large-diameter bored pile can be greatly increased by pile tip post grouting. The increased value of the pile bearing capacity is high with a large pile diameter and pile length under pile tip post grouting conditions.

Total 2