Precise control over air cavity generation in liquids is critical in numerous underwater marine systems, where cavity formation can largely reduce fluid resistance and minimize energy consumption. However, how the instability of the three-phase contact line at the microscopic scale induces the formation of macroscopic air cavities and thereby achieves drag reduction has not yet been fully elucidated. In this study, superhydrophobic (SHB) spheres with contact angles as high as 152° were fabricated using a spray-coating method. The liquid film evolution, flow field structure, pressure distribution, and hydrodynamic characteristics during the vertical immersion of spheres were systematically investigated through a combination of experiments and numerical simulations. The findings indicate that surface wettability is the key factor determining air cavity formation. The results show that the hydrophilic sphere did not generate an air cavity under identical immersion conditions, whereas the SHB sphere formed a stable encapsulated air cavity. The underlying mechanism is that, owing to the low adhesion characteristic of the superhydrophobic surface, the adverse pressure gradient induces separation of the liquid film, which triggers pinning of the contact line near the equator of the sphere, prevents the liquid film from closing toward the poles, and thereby promotes air cavity formation. This air cavity transforms the solid–liquid no-slip boundary into an air–liquid free-slip boundary, significantly altering the flow field structure at the rear of the sphere. Under the optimal conditions within the investigated Reynolds number range, this mechanism effectively suppresses flow separation and vortex shedding, yielding a maximum observed drag reduction of approximately 90%. Additionally, the drag-reduction effect intensifies as the air cavity morphology transitions toward a stable streamlined shape with increasing Reynolds number. This research offers new insights into drag reduction via air cavities and provides a reliable theoretical foundation for the design of high-performance underwater drag-reducing surfaces.
Publications
- Article type
- Year
Article type
Year
Open Access
Research Article
Online First
Friction
Published: 17 November 2026
Downloads:28
Total 1
京公网安备11010802044758号