Aircraft icing poses a critical threat to flight safety. Traditional active anti-/de-icing methods are limited by high energy consumption and reliance on external power sources, while single-function passive icephobic surfaces tend to fail in low-temperature, high-humidity environments. To address these challenges, this study presents the design and fabrication of multifunctional composite surfaces integrating photothermal response, phase-change thermal storage, and superhydrophobicity. Two photothermal superhydrophobic coatings were constructed on the composite phase-change substrate by displacement deposition and one-step spraying, respectively. Experiments were conducted to analyze the thermodynamic behavior of the entire process of droplet freezing, melting and shedding on the surface. The results show that the surface can rapidly heat up under solar irradiation, enabling ice droplets to roll off the inclined surfaces before complete melting, thereby achieving efficient self-de-icing. The surface maintains stable superhydrophobicity even at low temperatures, significantly delaying droplet freezing. Introducing copper foam can significantly enhance the thermal conductivity of phase-change materials, extending the active temperature control duration of the composite surface to over 1 000 s under dark conditions and improving its anti-icing reliability in intermittent illumination scenarios. In addition, through systematic analysis of the heat transfer processes during the full droplet freezing-melting cycle, the synergistic mechanisms of photothermal conversion, superhydrophobicity, and phase-change thermal storage across different stages of anti-icing and de-icing are elucidated.
- Article type
- Year
- Co-author
Open Access
Issue
This study establishes a multiphysics numerical model to investigate the evaporation dynamics of nanofluid droplets on heated substrates by employing the Arbitrary Lagrangian-Eulerian (ALE) method. The model fully couples internal and external fluid flow, heat transfer, and mass transport, while tracking nanoparticle motion within the droplet through a particle-tracing approach. Particular attention is given to the evolution of temperature fields, vapor concentration distributions, interfacial mass fluxes, and the trajectories of suspended nanoparticles during different evaporation stages. The results show that substrate heating and surface evaporative cooling jointly establish a surface tension gradient that drives Marangoni circulation within the droplet. As the droplet gradually flattens, the internal flow evolves from a single vortex into a multiple-vortex structure, with four vortices forming at 70 s during late-stage evaporation. This multiple-vortex structure persists for approximately 12 s, causing local perturbations in interfacial temperature and evaporation flux. The evaporative mass flux at the liquid-gas interface is higher near the droplet edge than at the center. During early evaporation, the mass flux near the edge reaches approximately 0.03 kg/(m²·s). As evaporation proceeds, the convective mass flux gradually decreases, whereas the diffusive mass flux remains relatively stable at approximately 0.005 kg/(m²·s). Nanoparticles migrate and accumulate under the influence of the internal flow, becoming trapped at the liquid-gas interface or deposited on the substrate. These findings reveal the coupling among temperature, flow, and mass transport, as well as nanoparticle migration patterns during nanofluid droplet evaporation. They provide a theoretical reference for the application of nanofluid working fluids in loop heat pipes for space applications.
京公网安备11010802044758号