Sort:
Open Access Original Article Issue
Effect of saturation degree on capillary-driven transition from fluidization to plug formation in multiphase systems
Capillarity 2026, 20(1): 14-28
Published: 14 July 2026
Abstract PDF (1.2 MB) Collect
Downloads:0

Capillary effects play a key role in gas-liquid-solid multiphase systems, determining particle connectivity and the transition between flow regimes. Existing studies typically focus on either completely dry or fully saturated media. This work theoretically and experimentally investigates the influence of liquid saturation in a granular medium on the transition from fluidization to formation of a stable sand plug during gas filtration. Laboratory studies and mathematical modeling of the process were conducted, followed by comparison of the results. The setup consisted of a tube containing a granular material, with gas injected from the bottom. Mathematical modeling demonstrated a non-monotonic dependence of the flow regime on the degree of saturation. For the initial parameters, two intervals were identified in which the sand plug detaches moves upward in a piston-like manner under the action of gas. Laboratory studies qualitatively confirmed the existence of these calculated regimes. The results show that the transition process from fluidization to plug formation is influenced by the degree of pore space saturation, as well as the size and wettability of the solid particles. The mechanism of this transition is explained by identifying several system states, characterized by differences in capillary pressure and particle cohesion due to the formation of capillary bridges. These findings indicate that the degree of pore space saturation plays a key role in shaping the flow regime in gas-liquid-solid multiphase systems through capillary effects.

Open Access Original Article Issue
The mechanism of capillaries hydraulic conductivity evolution under confining pressure: Experimental modelling using 3D-printing approach
Capillarity 2025, 17(3): 97-108
Published: 15 December 2025
Abstract PDF (2.6 MB) Collect
Downloads:47

The effect of confining pressure on the hydraulic conductivity of capillaries in cylindrical samples is examined. The three-dimensional-printed samples were made from photopolymer resin. Capillaries in the samples were modeled by grooves of various geometric shapes. The mechanism of capillary deformation in the samples under increasing confining pressure has been identified. The change in capillary conductivity depending on their location (central and lateral) and configuration (sinuous) has been revealed. Based on correction functions for the geometric dimensions of the capillaries, it has been mathematically confirmed that under confining pressure, a capillary deforms primarily along the contact plane due to the sliding of the sample’s halves against each other. The width of a capillary is more sensitive to confining pressure than its depth. It has been established that the exponent in the conductivity (permeability) equation of the samples under cyclic loading is determined by the hydraulic area of the capillary. The obtained values of the width and depth correction factors allow for predicting changes in the filtration resistances of capillaries in various materials. Capillary deformation manifests as a change in its geometric dimensions (height and width), i.e., the crushing of the capillary banks is observed, leading to a reduction in the capillary’s hydraulic area, which causes a decrease in sample conductivity with an incomplete hysteresis.

Total 2