This study presents an intelligent condition monitoring framework for electric monorail system cart systems, integrating conformal printed sensing, machine vision, and deep learning. Overcoming sensor integration challenges, thermal-field assisted electrohydrodynamic jet printing is employed to fabricate high-resolution zinc oxide sensors on complex surfaces, guided by a multiphysics model elucidating laser–jet interactions. Key process parameters (Zn2+ concentration, temperature, and voltage) are optimized for jet stability and microstructure. For operational diagnostics, a hyperparameter-optimized neural network is developed for track strain signal analysis, and a transfer learning-enhanced convolutional neural network is implemented for visual detection of track cable cracks. Experimental validation confirms the framework’s efficacy in achieving precise state identification, significantly boosting fault detection accuracy, reducing labor costs, and enabling intelligent operation and maintenance.
- Article type
- Year
- Co-author
Open Access
Research Article
Issue
Open Access
Paper
Issue
Piezoceramic is ubiquitously used in high-performance sensors and actuators. Three-dimensional (3D) printing of lead zirconate titanate (PZT) is attractive and highly desired for such device applications, but most of the existing methods are inherently limited to micron resolution, which makes them untenable for fabricating complex 3D architectures with high-definition features. Here, an electrohydrodynamic jet (E-Jet) nanoprinting strategy has been proposed to fabricate PZT 3D structures with the characteristics of flexibility and scalability. Different kinds of 3D PZT true nanostructures (resolution ~40 nm, aspect ratio ~400) were directly fabricated using a 100 μm-sized nozzle. And the PZT nanostructures exhibited well-developed perovskite crystal morphology, large elastic strain (elongation ≈ 13%), and high piezoelectric property (d31 ≈ (236.5 × 10−12) C·N−1). A bionic PZT air-flow sensor was printed to monitor air-flow detection, demonstrating well sensitivity with ultra-slow air-flow of 0.02 m·s−1. The discovery reveals an efficient pathway to 3D-printing PZT nanostructures for next-generation high-performance piezoelectric devices.
京公网安备11010802044758号