Moso bamboo is a species of giant timber to serve as a natural composite material worldwide. Conventional blades cannot fully meet the low efficiency and cutting performance of manual delimbing during harvesting. In this study, a biomimetic profiling blade was inspired by the mandibular contour of the Acanthomyrmex glabfemoralis ant. Soldier ants of this species were selected as a biological prototype. The outstanding cutting and mechanical strength of their mandibles were optimized after long-term natural evolution. The morphologies and geometric configuration of the serrated mandible teeth were systematically characterized by scanning electron microscopy with digital image processing. Reverse engineering techniques were employed to accurately extract the contour curve of the mandible serrations after observations. A profile model of the cutting edge was established to derive the mathematical equation of the biomimetic edge. A biomimetic delimbing blade was formed to serve as the geometric structure. Compared with conventional flat-edge blades, a non-uniform curvature profile of the blade was integrated to enhance stress distribution and cutting stability during operation. A bidirectional dynamic framework was constructed to systematically evaluate the cutting performance of the biomimetic blade using the coupled EDEM and ANSYS simulation. A discrete element model of bamboo branches was first developed in the EDEM platform, in which the internal reinforced fiber structure of bamboo was represented by the Hertz–Mindlin with Bonding contact model. Bonded particles were used to simulate the mechanical and fracture behavior of the fibrous vascular bundles. A finite element model of the blade was constructed with the optimal material properties and boundary conditions in ANSYS software. A bidirectional coupling interface was achieved for the real-time data exchange between the blade and the bamboo branch. Synchronous analysis was also performed on the contact forces, bond breakage evolution, and structural stress response during delimbing. A three-factor, three-level orthogonal experiment was implemented to investigate the effects of the edge of the blade, blade thickness, and feeding speed on two key performance indicators: the bond breakage number and the maximum equivalent stress. Response surface analysis revealed that there were significant differences in these influencing factors. In the number of bond breakages, the blade edge was the most significant factor, followed by blade thickness, while the feeding speed had a relatively smaller effect. The optimal combination of parameters was obtained after multi-objective optimization: blade thickness of 4 mm, blade edge of 26°, and feeding speed of 1.6 m/s. The better performance of the biomimetic blade was achieved under these optimal conditions. The maximum equivalent stress and the number of bond breakages were reduced by 16.33% and 6.66%, respectively, compared with the conventional flat blade. Bench experiments were conducted to further validate the reliability of the simulation. Both the conventional flat blade and the biomimetic blade were used to cut bamboo branches under identical operating conditions. Cutting quality was evaluated to measure the impurity rate on the cut surface. The average impurity rate was 4.06% for the flat blade, whereas the biomimetic blade achieved a lower error of 2.36%, corresponding to a reduction of 1.7 percentage points. Overall, the delimbing blade was optimized to integrate the biological inspiration, reverse engineering, and coupled DEM–FEM simulation. The finding can provide theoretical insights into the cutting mechanism of fibrous biological materials. Technical support can also offer to optimize the structure and performance of delimbing tools during moso bamboo harvesting.
- Article type
- Year
- Co-author
Vegetables have been the second largest cultivated crop after grain in China, among which leaf vegetables account for 25% of the total planting area of vegetables. Among them, seedling transplanting is one of the most important steps during planting. Automatic transplanting can be expected as an effective way to fully meet the requirement of single-plant planting of leafy vegetables. However, it is still lacking in the automatic transplanting equipment of leaf vegetables, particularly on the reliability. Two challenges remain in the application of the automatic transplanter in leafy vegetables: first, the sending and dividing seedlings are suitable for long-stem seedlings of solanocarps with developed roots, rather than broad-leaved and short-stem leafy vegetables. Second, the high accuracy of sending and dividing seedlings can lead to the low reliability of the machine and the planting efficiency. Therefore, it is urgent to explore raising seedlings, conveying and separating suitable for the automatic transplanting of leafy vegetables, in order to improve the mechanical planting level of leafy vegetables. In this study, a combined conveying and separation device was designed with the conveyor belt and stop pin for the cabbage substrate block seedlings, particularly for the high success rate and low injury rate of automatic conveying and separating of leafy vegetables. Combined with the mechanical properties of cabbage substrate block seedlings, the theoretical analysis was carried out to determine the stable conveying and separating conditions of the conveying and separating device and the working parameters of the key mechanism. The test bench was built for the single-factor test to determine the range of key factor parameters. The front conveyor belt motor speed, rear conveyor belt motor speed, and frequency of the stop pin were selected as the main test factors. The Box-Behnken central composite test was carried out with the success rate of seedling separation and the substrate block breakage rate as the evaluation indexes. The second-order regression model was established to clarify the influence of various influencing factors on the indexes. The results showed that the better performance of conveying and separating was achieved, when the motor speed of the front conveyor belt was 104 r / min, the motor speed of the rear conveyor belt was 75 r/min, and the frequency of the stop pin was 1.85 s per time. The success rate of seedling separation was 92.73%, and the damage rate of the substrate block was 4.09% in the bench verification test. The success rate of seedling separation was 91.81% and the damage rate of the substrate block was 4.62% in the field verification test. The error values of the two verification tests and the optimization were less than 2 percental points, indicating the high stability. This finding can provide a strong reference for the design of automatic vegetable transplanting equipment.
Open Access
Issue
Aiming at the problems of low success rate and high seedling injury rate of automatic vegetable transplanting, this study focused on cabbage substrate block seedlings and developed a progressive push-out automatic seedling device controlled by a PLC system. Based on the friction mechanical properties of seedlings-tray during seedling taking, the collision rebound theoretical analysis of substrate block seedling delivery and the finite element simulation analysis of the seedling taking mechanism were carried out to determine the conditions for stable seedling taking and delivery of the device and the working parameters of the key mechanisms. To evaluate individual parameter effects, a test bench was built, and the effective ranges of key factors were subsequently determined. Three key experimental factors, the inclination angle of the limit guide plate, the seedling separation channel width, and the seedling separation cylinder pressure, were investigated using an L9(34) orthogonal array design with blockage rate and breakage rate as evaluation metrics. The range and variance analysis methods were employed to determine the relative significance of each factor’s influence on the performance indicators. The optimal parameters were determined as: the inclination angle of the limiting guide plate was 3.5°, the width of the seedling separation channel was 50 mm, and the pressure of the seedling separation cylinder was 0.6 MPa. Under these conditions, the seedling taking effect was significantly improved: the blockage rate was 2.46%, the breakage rate was 3.18%, and the seedling taking success rate was 94.36%. The optimal parameter combination was verified by the experiment: the average blockage rate was 3.23%, the average breakage rate was 3.68%, and the average success rate was 93.09%. Compared with the orthogonal experiment, the relative success rate error was 1.27%, indicating that the device has high stability. This study will provide a reference for the design of automatic vegetable transplanters.
京公网安备11010802044758号