Sort:
Open Access Original Article Issue
Phase-field modeling of capillary barrier effects: Roles of flow orientation relative to gravity and invasion velocity
Capillarity 2026, 20(3): 86-98
Published: 18 August 2026
Abstract PDF (6 MB) Collect
Downloads:0

Capillary barrier effects hinder water migration across textural contrasts in layered porous media, with significant implications for geotechnical and geological practice. In this study, the phase-field method was applied to simulate capillary barrier effects at the microscale, focusing on the roles of flow orientation relative to gravity (normal, assisted, and opposed) and invasion velocity. The results showed that in the capillary-dominated regime at low velocities, the capillary barrier effect was highly sensitive to flow orientation: It effectively retained water in the fine-pore region when gravity was normal to or opposed the flow, but was substantially weakened when gravity assisted the flow. In the viscous-dominated regime at high velocities, viscous forces dominated over capillary and gravitational effects, suppressing the capillary barrier effect and producing similar invasion patterns across all flow orientations. Quantitative saturation analysis indicated that, under low-velocity conditions, the fine-pore region saturation at both the arrival and breakthrough of the invading front at the fine-coarse interface was highest for gravity-opposed flow, intermediate for gravity-normal flow, and lowest for gravity-assisted flow. These differences diminished and converged as velocity increased. The maximum net enhancement in fine-pore region saturation occurred under low-velocity, gravity-normal conditions. These findings provide microscopic insights into the interplay among capillary, viscous, and gravitational forces governing capillary barrier effect behavior, and offer a scientific basis for understanding water redistribution in layered porous systems.

Issue
Experimental study on shear behavior of concrete beams without stirrups strengthened by CFRP sheet
Journal of Civil and Environmental Engineering 2025, 47(1): 118-129
Published: 01 February 2025
Abstract PDF (1.8 MB) Collect
Downloads:25

The shear failure mode and failure mechanism of 12 CFRP-strengthened concrete beams without stirrups were analyzed. The stress-strain curves of the CFRP beams in the whole process were obtained. The quantitative effects of structural size and CFRP ratio on the shear strength of CFRP are discussed. Furthermore, a formula for calculating the shear strength of CFRP is proposed and compared with the test results, the test results of others and the standard results in this work. It is found that the structural size has a significant influence on the shear strength of CFRP. The nominal shear strength of CFRP decreases significantly when the structural size increases. In addition, when the beam depth changes from 300 mm to 1200 mm, the nominal shear strength of CFRP decreases by about 50%, which has an obvious size effect. Furthermore, under different cross-section sizes, the nominal shear strength of CFRP increases with the increase of CFRP ratio ρf , but with the increase of CFRP ratio ρf, the increase amplitude of nominal shear strength decreases, showing a nonlinear growth trend. Finally, the established formula for calculating the shear capacity of CFRP could predict the shear capacity of CFRP under different CFRP ratio and section size scientifically.

Total 2