Publications
Sort:
Issue
Fatigue Cracking Characteristics of Butt Welds in U-Rib Embedded Section of Steel Bridge Decks
Journal of South China University of Technology (Natural Science Edition) 2024, 52(5): 92-100
Published: 25 May 2024
Abstract PDF (12.3 MB) Collect
Downloads:6

As one of the typical fatigue details of the steel box girders, the U-rib butt weld in the embedded sections of the steel bridge decks is prone to fatigue cracking under the repeated action of the wheel load, and it directly affects the safe operation and durability of the bridge structures. In order to explore the fatigue cracking characteristics of U-rib butt weld on the roof of the orthotropic steel bridge decks, this paper first established a local model of the steel bridge deck using finite element simulation, and studied the fatigue stress characteristics of the U-rib butt welds in the embedded sections. Then it designed four full-scale single U-rib specimens and carried out a fatigue performance analysis of the actual structure combing with fatigue test. On this basis, the modified main S-N curve suitable for fatigue life prediction of U-rib butt welds was proposed by the structural stress method, and the fatigue crack propagation behavior of weld detail was explored based on the extended finite element method (XFEM). The results show that the longitudinal influence range of U-rib butt weld stress under the wheel load is two cross-spacer spacing, and the lateral influence range is 1.5 U-rib spacing. The arc transition area is subjected to the greatest fatigue stress amplitude and high stress concentration, which becomes a potential fatigue vulnerable point. The fatigue cracks observed in the experiment all start at the arc transition and continue to extend to the bottom edge of the longitudinal rib and the web. Based on the evaluation of the nominal stress method, the average fatigue strength of the welds is 68 MPa, which is close to the 71 MPa specified in the European Code. Compared with the main S-N curve proposed based on the equivalent structural stress method, the modified main S-N curve proposed in this research is safer and more conservative for fatigue life prediction. The extended finite element method can effectively simulate the expansion behavior of U-rib butt welds. Both fatigue tests and XFEM results indicate that the fatigue crack propagation direction depends on the location of the initial defect. When the initial defect appears on the bottom plate, fatigue cracks tend to extend along the bottom plate; but when the initial defect is located on the web plate, fatigue cracks tend to extend along the web.

Issue
Intelligent Method for Identifying Damage of Steel Members with Localized Random Pitting Based on Convolutional Neural Network
Journal of South China University of Technology (Natural Science Edition) 2024, 52(11): 43-54
Published: 25 November 2024
Abstract PDF (14.7 MB) Collect
Downloads:4

Pitting induced by the marine environment has a significant impact on the safety of steel structures and its form exhibits a strong multi-scale and multi-parameter randomness. In order to effectively detect and identify damage in actual engineering, this paper systematically investigates local random pitting of steel members via experimental study, numerical simulation, and theoretical analysis based on convolutional neural networks. Firstly, under the premise of following the distribution model of pitting corrosion pit depth and the time-varying model of pitting corrosion pit diameter, the boundary and cross restrictions were imposed on the position distribution of corrosion pits using multi-parameter local random pitting numerical model. Python was utilized to generate randomness in the size, location, and number of pits, allowing Abaqus to generate a large number of finite element models of steel plates with varying rust locations and rust rates, and the mode shape samples of each finite element model were obtained. Then, the finite element model was used as a test prototype, and a large number of samples of the first six-order vibration patterns obtained from numerical tests were used to train a convolutional neural network model for identifying damage location. The accuracy of the model was verified using the finite element data set. Finally, the vibration results of the ruler test were used to further verify the accuracy of the convolutional neural network model. The study shows that the model fully considers the randomness of pitting corrosion in aspects such as shape parameters and position coordinates. The parameters are reasonable, close to the actual pitting corrosion situation in reality, and the recognition accuracy is relatively high. In numerical tests, the model achieved 95.9% accuracy in identifying pitting damage to the real area and its adjacent areas, and 81.2% accuracy in full-scale tests, meeting the requirements for the practical intelligent application of identifying steel component damage.

Total 2