To investigate the influence of afterbody on the infrared radiation characteristics of S-shaped nozzles in airframe-propulsion integration designs, this study employed scaled models of an S-shaped nozzle and a flying-wing aircraft's afterbody. Utilizing a partitioned measurement method, experiments were conducted to characterize infrared radiation properties across representative detection surfaces in the rear hemispherical space. Results indicate that under the experimental conditions, the zonal measurement method has solved the problem that the core area of the tail jet flow cannot be covered under large-angle detection. In the upper, horizontal and lower detection surfaces, the integral radiation intensities of the second shooting account for 21.4%, 8.7% and 29.2% of the total integral radiation intensities respectively. The rear fuselage significantly alters the original infrared radiation characteristics of the S-shaped nozzle: In the forward tail direction (α = 0°), the heated afterbody acts as a secondary radiation source, increasing the peak radiation intensity by 12.3% compared to the model without afterbody. At lateral angles (α > 5°), afterbody shields the high-temperature exhaust and wall surfaces, reducing the radiation intensity of the afterbody test specimen by an average of 10.52% and 40.51% on the horizontal and downward detection planes, respectively, compared to the S-shaped nozzle.
- Article type
- Year
Open Access
Full Length Article
Issue
The serpentine convergent-divergent nozzle represents an optimal configuration for next-generation fighter aircraft characterized by low detectability and high thrust-to-weight ratio. In contrast to the serpentine convergent nozzle, such configuration offers increased design flexibility with additional parameters, leading to heightened interactions among these parameters. As such, it is crucial to reveal the influence of design parameters on the aerodynamic performance of the serpentine convergent-divergent nozzle and the multifactor interaction, as well as its mechanism. Therefore, the influence, interaction and sensitivity of parameters on the aerodynamic performance of the nozzle were numerically investigated using the orthogonal test method. Additionally, the influence mechanism of the convergence angle, throat aspect ratio, and axial length to inlet diameter on the flow characteristics of the nozzle was investigated in detail. The results show that the convergence angle is identified as the main factor affecting the aerodynamic parameters of the nozzle. As the convergence angle increases, the thrust coefficient, total pressure recovery coefficient and discharge coefficient gradually decrease. The interaction between throat aspect ratio and other parameters is obvious. Different design parameters affect the local loss and the friction loss by affecting the curvature and wetted perimeter area, resulting in different aerodynamic characteristics of serpentine convergent-divergent nozzle.
京公网安备11010802044758号