As there are some problems with the traditional noodle processing technology, a vibrating plate-type ultrasonic device designed in our laboratory was applied to dough processing, and the effects of ultrasonic time and power as well as dough pressure and thickness on the quality of fresh noodles were investigated by texture analyzer, scanning electron microscopy (SEM) and comprehensive weighted score method. The improving effect of ultrasonic-assisted dough processing on the texture of fresh noodles was evaluated. The results indicated that ultrasonic treatment had a significant effect on improving the quality of fresh noodles. The highest comprehensive weighted score was observed at ultrasonic time of 30 s, ultrasonic power of 330 W, dough pressure of 94.0 Pa and dough thickness of 3 mm. Compared with the control group, the elasticity and hardness of fresh noodles were increased by 19.5% and decreased by 18.1%, respectively. SEM showed that the cross section of fresh wet noodles treated by ultrasound exhibited a more complete and denser network structure, with smaller pore size and porosity. In addition, the starch granules were more uniformly and tightly wrapped in the gluten network structure, suggesting that ultrasonic treatment can contribute to a more stable and denser gluten network. Overall, ultrasonic-assisted dough processing technology can significantly improve the quality of fresh noodles. This study may provide a new idea for the production of flour products.
- Article type
- Year
- Co-author
Open Access
Issue
Open Access
Issue
To analyze the effect of heat treatment on the structure and physicochemical properties of buckwheat bran protein (BBP), the molecular mass, secondary structure, intrinsic fluorescence spectrum, free sulfhydryl content, disulfide bond content, microstructure, thermal properties, and rheological properties of BBP were characterized before and after heat treatment. The results showed that part of the subunits of BBP were degraded into small polypeptides or oligopeptides. The α-helical structure was transformed into β-sheet, β-turn and random coil, and the contents of free sulfhydryl groups and disulfide bonds were significantly increased. Compared with soy protein isolate (SPI), the peak temperature, denaturation enthalpy, apparent viscosity, storage modulus (G’) and loss modulus (G”) of BBP were significantly lower. The surface of heat-induced gels of BBP was rougher, and there were obvious cracks on the gel wall, indicating that the thermal stability of BBP was lower than that of SPI. In summary, heat treatment could change the structure of BBP, and have different effects on its physicochemical properties.
Open Access
Issue
The present study tested the effect of addition of whole common buckwheat flour on the rheological properties of wheat dough, and the textural characteristics, water distribution, secondary structure and molecular mass distribution of proteins, microstructure, and color of fresh noodles. The results demonstrated that the dough with 30% whole common buckwheat flour had a higher G’ (5.3 × 105 Pa) and a minimum tan δ value of 0.50. The resulting noodles had a maximum elasticity of 0.97, a maximum α-helix content of 28.30%, and a denser and more homogenous microstructure. According to sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) data, the band intensities of buckwheat protein subunits increased with increasing addition of whole common buckwheat flour. Compared with the control group, the addition of whole common buckwheat flour caused partial transformation of tightly bound water to weakly bound water and free water. As the addition of common buckwheat flour increased, the L* value of noodles decreased significantly, the a* and b* values increased to varying degrees, and as a result the overall color turned reddish and yellow. In conclusion, the addition of 30% whole common buckwheat flour can improve the mechanical properties and processing quality of fresh noodles.
京公网安备11010802044758号