A compact fiber-optic magnetic field sensor is proposed by packaging an orthogonal dual-frequency fiber grating laser and a copper wire with alternating electrical current together inside epoxy resin. The alternating current generates Ampere force in a magnetic field, which changes the birefringence of the fiber laser and hence tunes the frequency of the beat signal after photodetection. The magnetic flux density can then be detected by measuring the frequency change of the beat signal. The sensitivity of the sensor can be tuned with a maximum response of 35.21kHz/kGs demonstrated. Moreover, the sensor shows good immunity to environment interference.

Auto-regressive (AR) spectral estimation technology is proposed to analyze the Brillouin scattering spectrum in Brillouin optical time-domain refelectometry. It shows that AR based method can reliably estimate the Brillouin frequency shift with an accuracy much better than fast Fourier transform (FFT) based methods provided the data length is not too short. It enables about 3 times improvement over FFT at a moderate spatial resolution.

A dual-frequency distributed Bragg reflector (DBR) fiber laser based sensor is demonstrated for low-frequency vibration measurement through the Doppler effect. The response of the proposed sensor is quite linear and is much higher than that of a conventional accelerometer. The proposed sensor can work down to 1Hz with high sensitivity. Therefore, the proposed sensor is very efficient in low-frequency vibration measurement.