Brittleness is pivotal in predicting shale reservoir quality and designing hydraulic fracturing strategies. However, intricate diagenetic environment of shale, characterized by distinct bedding structures, challenges the isotropic-based brittleness assessment methods. This study introduces a new quantitative approach to assess shale brittleness anisotropy, integrating anisotropic elastic responses and tensile fracturing mechanisms. The proposed model effectively reduces uncertainty in the causal relationship between Young's modulus and brittle failure. Comprehensive experimental validation encompassed 18 samples from six groups of Chang 7 terrestrial shale in Ordos Basin. The optimal anisotropic tensile strength criterion (N-Z criterion, error < 5%) was identified, enhancing the theoretical accuracy of the proposed model. Comparative experimental results demonstrate that the model adeptly predicts brittleness strength and directional variation characteristics across variations in mineral type, content and microstructure, underscoring its effectiveness. Additionally, theoretical predictions on shale samples with different organic matter reveal that brittleness strength and its anisotropy across varying OM are not monotonously decreasing. The research highlights that brittleness characteristics are influenced by both mineral type/content and microstructural distribution. Notably, the prevalence of isotropic brittle minerals is the primary determinant of brittleness strength, positively correlated. Conversely, ductile mineral content (striped skeletal support-type OM and clay) negatively correlates with brittleness strength, acting as secondary controlling factors. The impact of pore-filled OM on brittleness appears negligible. Rock physical modeling based on equivalent media theory for shale with pore-filled and/or striped OM further elucidates the mechanisms driving these variations. These findings attach great importance in assessment of terrestrial shale geological and engineering “sweet-spots".
- Article type
- Year
Open Access
Original Paper
Issue
Open Access
Original Paper
Issue
Understanding the quantitative responses of anisotropic dynamic properties in organic-rich shale with different kerogen content (KC) is of great significance in hydrocarbon exploration and development. Conducting controlled experiments with a single variable is challenging for natural shales due to their high variations in components, diagenesis conditions, or pore fluid. We employed the hot-pressing technique to construct 11 well-controlled artificial shale with varying KC. These artificial shale samples were successive machined into prismatic shape for ultrasonic measurements along different directions. Observations revealed bedding perpendicular P-wave velocities are more sensitive to the increasing KC than bedding paralleling velocities due to the preferential alignments of kerogen. All elastic stiffnesses except C13 are generally decreasing with the increasing KC, the variation of C11 and C33 on kerogen content are more sensitive than those of C44 and C66. Apparent dynamic mechanical parameters (ν and E) were found to have linear correlation with the true ones from complete anisotropic equations independent of KC, which hold value towards the interpretation of well logs consistently across formations. Anisotropic mechanical parameters (ΔE and brittleness ΔB) tend to decrease with the reducing KC, with ΔB showing great sensitivity to KC variations. In the range of low KC (<10%), the VP/VS ratio demonstrated a linearly negative correlation with KC, and the VP/VS ratio magnitude of less than 1.75 may serve as a significant characterization for highly organic-rich (>10%) shale, compilation of data from natural organic rich-shales globally verified the similar systematic relationships that can be empirically used to predict the fraction of KC in shales.
京公网安备11010802044758号