To address the complex coupling characteristics of multiple angular motions-comprising precession, nutation, and spin, during flight of spinning projectiles, a suspension support mechanism with kinematic redundancy is proposed for wind tunnel testing of Spinning Projectile Models (SPMs) based on Wire-Driven Parallel Robot (WDPR) technology. For the first time, WDPR is successfully used in a closed wind tunnel for both static and dynamic wind tunnel tests. First, the suspension support mechanism and the corresponding test model structure of the SPM are designed. Then, the kinematic model of the support mechanism with kinematic redundancy is established. Based on this, a wind tunnel test system for WDPR-based suspension support is developed. Finally, wind tunnel tests are conducted in the CG-01 high-speed wind tunnel. The test results demonstrate that the proposed suspension support system successfully replicates the multi-degree-of-freedom (multi-DOF) coupled motions of the SPM. The feasibility and effectiveness of the system for static and dynamic coupled motion tests of the SPM are validated. The wind tunnel tests involving the coupled angular motions of precession, nutation, and spin for the SPM are also realized for the first time. The dynamic signals obtained preliminarily reflect the complexity of the aerodynamic characteristics of the SPM under multi-DOF coupled motions, laying a foundation for further investigations into the aerodynamic characteristics of the SPM during coupled motion.
- Article type
- Year
Open Access
Full Length Article
Issue
This paper presents a novel suspension support tailored for wind tunnel tests of spinning projectiles based on Wire-Driven Parallel Robot (WDPR), uniquely characterized by an SPM (Spinning Projectile Model)-centered mobile platform. First, an SPM-centered mobile platform, featuring two redundant and another unconstrained Degree of Freedom (DOF), and its suspension support mechanism are designed together, collectively constructing a WDPR endowed with kinematic redundancy. Afterward, the kinematics of the mechanism, boundary equations for the redundant DOFs, and relevant kinematic performance indices are then proposed and formulated. The results from both prototype experiments and numerical assessments are presented. The capability of the support mechanism to replicate the complex coupled motions of the SPM is verified by the experimental results, while the proposed kinematics and boundary equations are also validated. Furthermore, it is revealed by numerical assessments that the redundant DOFs of the mobile platform exert a minimal impact on the kinematic performance of the suspension support. Finally, the optimal global attitude performance is obtained when these DOFs are set to zero if they are restricted to constants. However, local attitude performance can be further improved by the variable values.
In view of the requirement that the rolling attitude of the object needs to be changed in the electromagnetic scattering test, a design scheme of a reconfigurable wire-driven parallel support mechanism is proposed, which can meet the test requirements in full rolling scanning and other attitudes. Its feasibility is theoretically analyzed and experimentally demonstrated. A reconfiguration strategy with a double rotary mechanism is used to construct a reconfigurable wire-driven parallel support mechanism, and the kinematic and static model of the mechanism is derived. Based on the structure matrix of the mechanism, the force closure workspace is solved using the Monte-Carlo method to calculate the attitude workspace for the design parameters. The variation pattern of cable length and the variation characteristics of wire tension are further analyzed for the two composite attitudes motion states of full rolling and pitching, full rolling and pitching and yawing of the target. Further, the electromagnetic scattering characteristics of the foam turntable support and wire structure are tested and analyzed. Finally, a comparative analysis of the radar scattering cross section of an aircraft target supported by the foam turntable support and by the wire-driven parallel support mechanism is carried out. The results indicate that the mechanism proposed shows good low scattering characteristics at 8~12 GHz frequency band. With the two support methods, the absolute value of the test error of the radar cross section of the aircraft target is less than 1 dBsm, and the relative error is between ±10%. The mechanism proposed can expand the ability of electromagnetic scattering test, and has a good prospect in engineering application.
京公网安备11010802044758号