Supersonic fuel film cooling is a promising way to simultaneously reduce the severe wall heat and friction load of the internal passage in a scramjet engine when operating at hypersonic conditions. Large eddy simulations were performed to investigate the cooling and wall friction characteristics of hydrogen and hydrocarbon films under inert and reactive circumstances. The results show that the essential difference of the turbulent state in the mixing layer contributes to the totally different behaviors of the cooling and wall friction reduction performances of the two fuel films. The turbulent transport processes between the hydrogen film and the mainstream are much weaker as compared to the case of hydrocarbon film, making inert hydrogen rather superior in cooling and friction reduction applications. Besides, the increase of wall temperature for hydrogen film under the inert case is mainly driven by the loss of hydrogen with high heat capacity instead of by direct heat addition. However, the film cooling performance severely deteriorates when the hydrogen film burns due to presence of severe heat release sources near the wall. On the other hand, combustion of hydrocarbon film in the boundary layer can remarkably improve its originally barely-satisfactory cooling and friction reduction performance to the level comparable to that of hydrogen film, due to the suppression of turbulent transport processes in the mixing layer and presence of heat absorption sources near the wall. Overall, the hydrogen film is more advantageous in friction reduction, while the hydrocarbon film is more suitable for cooling.
- Article type
- Year
Open Access
Full Length Article
Issue
To investigate the influence of hydrocarbon fuel chemical reactions on the film cooling and drag reduction characteristics of discrete holes, we selected four types of discrete hole configurations: Cylindrical Hole (CH), Multiple Hole (MH), Double Jet Hole (DJH), and Contraction Expansion Hole (CEH). A numerical study of discrete hole film in a high Mach number combustor was conducted to compare the effects of hydrocarbon fuel chemical reactions on the film cooling and drag reduction characteristics of different discrete holes. The results indicate that chemical reactions of hydrocarbon fuels reduce the momentum of the cooling jet near the wall and weaken the intensity of the vortex structure formed by the cooling jet. However, these chemical reactions improve the film cooling efficiency of discrete holes through endothermic cracking reactions, leading to an expanded spanwise coverage of the film cooling. Specifically, the double jet hole and contraction expansion hole exhibit a large spanwise velocity component and extensive cooling coverage. Furthermore, the drag reduction effect of hydrocarbon fuel combustion in the boundary layer contributes to a reduction in wall shear stress, while combustion itself leads to a decrease in vortex structure dissipation. However, the mixing process, which is dominated by vortex structures, is reduced due to a decrease in the degree of mixing, ultimately weakening the drag reduction performance of combustion. The drag reduction effects of the multiple hole and contraction expansion hole are calculated to be 27.4% and 18%, respectively.
京公网安备11010802044758号