This paper proposes a new aerodynamic parameter identification method that combines a Gated Recurrent Unit (GRU) neural network model and the Gauss-Newton (GN) optimization algorithm, aiming to accurately identify the unknown aerodynamic parameters from longitudinal flight data generated by a self-developed small-sized Unmanned Aerial Vehicle (UAV) and ATTAS aircraft. The GRU network model was designed and then trained to characterize the chosen aircraft systems' dynamics while avoiding numerical integrals of the postulated dynamic models. The GN optimization algorithm incorporates the trained GRU network model to obtain high-confidence identification results by iteratively minimizing a cost function concerning the unknown aerodynamic parameters. The measured flight data used in this study includes non-stall flight data from the self-developed UAV and near-stall flight data from the ATTAS aircraft. The study results demonstrate that the GRU network model can maintain reliable prediction effects for the non-stall and near-stall flight data by adjusting the corresponding network parameters such as the number of hidden layers, number of units in each hidden layer, dropout rate, time-step, and learning rate. Furthermore, the effectiveness of the proposed parameter identification method is confirmed by comparing the identified aerodynamic parameters with the corresponding wind tunnel or reference values.
- Article type
- Year
- Co-author
Open Access
Issue
The Vortex Particle Method (VPM) is a meshless Lagrangian vortex method. Its low numerical dissipation is exceptionally suitable for wake simulation. Nevertheless, the inadequate numerical stability of VPM prevents its widespread application in high Reynolds number flow and shear turbulence. To better simulate these flows, this paper proposes the stability-enhanced VPM based on a Reformulated VPM (RVPM) constrained by conservation of angular momentum, integrating a relaxation scheme to suppress the divergence of the vorticity field, and further coupling the Sub-Grid Scale (SGS) model to account for the turbulence dissipation caused by vortex advection and vortex stretching. The validity of the RVPM is confirmed by simulating an isolated vortex ring’s evolution. The results also demonstrate that the relaxation scheme of vorticity enhances the numerical stability of the VPM by mitigating the divergence of the vorticity field. The leapfrogging vortex rings simulation demonstrates that the RVPM with the present SGS model can more precisely feature the leapfrog and fusion of vortex rings and has improved numerical stability in high Reynolds number flows. The round turbulent jet simulation confirms that the stability-enhanced VPM can stably simulate shear turbulence and accurately resolve fluctuating components and Reynolds stresses in the turbulence.
Open Access
Full Length Article
Issue
The development of the Urban Air Mobility concept has proposed stringent requirements for the fixed-wing vehicle’s Short/Vertical Take-Off and Landing (S/VTOL) performance. With its lift-enhancing impact, the channel wing, can improve aircraft low-speed performance and Short Take-Off and Landing (STOL) capability. It is critical for the performance analysis and flow mechanism study of a channel wing that considers the influence of propeller slipstream to guide the design of S/VTOL aircraft. The law and mechanism for the effect of the enclosing angle of the arc wing, the phase angle of the propeller, the tip clearance, the rotational speed and the chordwise position of the propeller on the channel wing are explored utilizing the quasi-steady multi reference frame method. A channel wing with a larger enclosing angle has a better ability to enhance lift and reduce drag using propeller slipstream. The effect of propeller phase angle on channel wing aerodynamic forces is periodic and weak. Increasing propeller rotational speed is helpful to enhance lift and resist flow separation for channel wing. It can reduce drag for tractor configuration but increase drag for pusher configuration. However, the nose-down pitching moment of a channel wing will grow dramatically, making longitudinal trimming in aircraft layout design challenging.
京公网安备11010802044758号