Noise reduction of different airfoils is important because these sections are used in wind turbines, propellers, and aircraft wings. Several methods are used for passive noise reduction of sections. One of these methods is the use of surface treatment. In this research, the effect of the typical surface treatment element (finlets) on the vortex structure at different frequencies in the turbulent flow created on the NACA2412 section is investigated. For this purpose, one-dimensional hot wire probe is used. The used surface treatment in this research has a special geometry and the distance between two consecutive finlets is 6 mm (S = 6 mm). This study shows that this surface treatment element can be used for noise reduction in high frequencies. Another result of this research is the suggestion of the most suitable position to install this special surface treatment element to reduce vortex energy in all frequency ranges. This installation location is determined based on a dimensionless parameter (Xaft/h).
Publications
- Article type
- Year
Article type
Year
Open Access
Full Length Article
Issue
Chinese Journal of Aeronautics 2023, 36(10): 112-123
Published: 26 June 2023
Total 1
京公网安备11010802044758号