CO2-assisted steam thermal recovery is an efficient CO2-enhanced oil recovery (CO2-EOR) technique, increases heavy oil production while storing CO2. To elucidate heavy oil and supercritical CO2 interactions under high-temperature and high-pressure conditions, PVT experiments were conducted, and molecular dynamics (MD) simulations were used to examine the effects of temperature and pressure on diffusion and dissolution in CO2. The analysis considered oil and gas density distributions, interaction energies between SARA fractions and CO2, radial distribution functions (RDFs), and diffusion coefficients obtained from mean square displacement (MSD). The results show that increasing temperature reduces the dissolved gas–oil ratio but enhances the volume coefficient. Light components such as saturates and aromatics interact most strongly with CO2 and dissolve fastest, whereas heavy components such as resins and asphaltenes have lower interaction energies and dissolve more slowly because of strong π–π association. The interaction energy between CO2 and light components is 2–4 times stronger than that with heavy components in the temperature range 373–523 K and pressure range 5–20 MPa. The CO2–SARA interaction energy decreases by about 30%–40% with increasing temperature, but increases by about 50%–60% with increasing pressure. The diffusion rate of SARA molecules is fastest at 523 K and 20 MPa, with diffusion coefficients of 34.8 × 10− 9, 20.4 × 10− 9, 6.2 × 10− 9, and 4.7 × 10− 9 m2/s, respectively. Overall, an injection temperature close to 250 ℃ combined with pressures exceeding 10 MPa provides optimal conditions for CO2 diffusion and dissolution, thereby facilitating the extraction of light fractions and maximizing viscosity reduction and thermal recovery performance.
- Article type
- Year
- Co-author
Open Access
Original Paper
Issue
Open Access
Perspective
Issue
Enhanced oil recovery draws increasingly interests from the research and development phases to oilfield implementation worldwide. Due to the complexity of the developed reservoirs and requirement of carbon footprint reduction, new innovations are urgently needed to increase enhanced oil recovery efficiency and/or reduce emissions simultaneously. This paper presents the strategies to improve the enhanced oil recovery performance of carbon dioxide flooding, polymer flooding and imbibition in complex reservoirs. Field trials conducted at Mahu reservoirs demonstrated the potential of nanoemulsion imbibition in stimulating tight oil recovery. These results can provide constructive envision for the development and application of enhanced oil recovery technologies for challenging systems.
京公网安备11010802044758号