Oil displacement by spontaneous imbibition is a capillary-governed process, in which wettability controls fluid displacement direction. Capillarity is a driving force to enhance oil displacement in water-wet system, while in oil-wet system capillarity is a resisting one. To promote oil displacement, the former requires high capillarity, but the latter opposes. Such requisites are hypothesized to be alternatively achieved by manipulating an oil-water interfacial tension, without altering wetting character. In this study, spontaneous imbibition was conducted with a set of specifically designed imbibing fluids. Brines at different valencies were meticulously selected to attain desired wettabilities: monovalent brine establishes a water-wetting while divalent brine provides an oil-wet characteristics. A non-ionic surfactant, Triton X-100, was intentionally chosen to solely reduce interfacial tension, with negligible change in wettability. By mixing each brine with the surfactant, high-interfacial tension and low-interfacial tension imbibing fluids at the same wettability for the two wetting regions were obtained, and hence the hypothesis can be examined. For water-wet system, reduced interfacial tension attributed to a weakened driving capillary force to oil displacement, and hence lower oil displaced. On the contrary in oil-wet system, reduction in resisting capillary force as contributed from a reduced interfacial tension displaced greater oil. The results demonstrate how the capillary-driven fluid displacement can be manipulated by the interfacial tension change only, without a challenge of altering wettability. With results obtained from both wetting regions, a correlation between capillarity and ultimate oil displacement was also observed.