Sort:
Issue
Topology self-generating method of isolated DC-DC converters with two switches
Journal of Beijing University of Aeronautics and Astronautics 2025, 51(5): 1415-1427
Published: 18 December 2023
Abstract PDF (1.4 MB) Collect
Downloads:38

More isolated DC-DC converter topologies are required as a result of the growing need for different power conversion brought on by the development of new energy generation and electrified transportation. To overcome the randomness and lack of topology optimization in generating topologies based on human experience, this paper proposes a vertex prime degree-based topology self-generation method of the isolated DC-DC converters with two switches. Firstly, the two-vertex-pair transformer model is proposed, and the circuits are converted into graphs using graph theory. Secondly, the numbers and the types of components used to form the circuit are regarded as the input condition of the method. Finally, the proposed self-generation method is utilized to traverse and generate all available isolated DC-DC converter topologies with the given components. An input DC source, an output DC source, two switches, two diodes, one transformer, one inductor, and one capacitor, namely, the isolated T1S2D2L1C1 DC-DC converters are examples of converter circuits. The 87 forward converters and 97 flyback converters can be generated. Taking the 87 forward converters as examples, they can be further categorized based on voltage gain into 25-boost forward converters, 24-buck forward converters, 32 buck-boost forward converters, and 6 constant voltage forward converters. Therefore, this method enables rapid and quantitative generation of new isolated DC-DC converter topologies through computer programming. It provides a topology library for engineering applications and establishes conditions for topology optimization and selection.

Open Access Regular Paper Issue
Time-domain Dynamic-performance-improvement Method for Pulse-width-modulated DC-DC Converters Based on Eigenvalue and Eigenvector Sensitivity
Chinese Journal of Electrical Engineering 2023, 9(1): 104-119
Published: 31 March 2023
Abstract PDF (638.8 KB) Collect
Downloads:63

For pulse-width modulated (PWM) DC-DC converters, the input voltage fluctuation and load variation in practical applications make it necessary for them to have better dynamic performance to meet the regulation requirements of the system. The dynamic-performance-improvement method for PWM DC-DC converters is mainly based on indirect dynamic performance indices, such as the gain margin and phase margin. However, both settling time and overshoot in the time domain are important in practical engineering. This makes it difficult for designers to obtain a clear understanding of the time-domain dynamic performance that can be achieved with improved control. In this study, a direct analysis of the time-domain dynamic characteristic of PWM DC-DC converters is performed. A dynamic-performance-improvement method based on eigenvalues and eigenvector sensitivity (E2S-based DPIM) is proposed to directly improve the time-domain dynamic performance index of PWM DC-DC converters. By considering a boost converter with proportional-integral control as an example, an additional virtual inductor current feedback control was designed using the proposed dynamic-performance-improvement method. Simulation and experimental results verify the validity and accuracy of the proposed dynamic-performance-improvement method.

Open Access Issue
Dual-current-injection CSCC Active Common-mode EMI Filters with High Insertion Loss for DC-DC Converters
Chinese Journal of Electrical Engineering 2022, 8(4): 19-29
Published: 31 December 2022
Abstract PDF (807.6 KB) Collect
Downloads:139

With the increase in the switching frequency and power density, DC-DC converters encounter more severe electromagnetic interference (EMI) problems. To suppress the common-mode EMI generated by converters, as well as maintain the high-power-density of converters, the active EMI filter (AEF) has attracted increasing interest owing to its small volume. The EMI suppression effect of the common single-stage single-sense single-injection AEF is confined because of the limited insertion loss, and the volume of the multi-stage AEF will be bulky. To solve this problem, this paper proposes a compact dual-current-injection current-sense current-compensation (DCJ-CSCC) AEF to increase the insertion loss in the entire conducted EMI frequency band, as well as considering the volume of the AEF. The structure and operating principle of the proposed AEF are introduced. Finally, taking a boost converter as an example, the effectiveness and advantages of the proposed DCJ-CSCC AEF were verified through a simulation and experiment, the results show that the proposed AEF has a better EMI suppression effect on the entire conducted EMI frequency band with a similar volume compared with existing single-injection feedforward current-sense current-compensation (FF-CSCC) and feedback current-sense current-compensation (FB-CSCC) AEFs. This paper provides a new selection for EMI suppression in DC-DC converters.

Open Access Editorial Issue
Editorial for Special Issue on Electromagnetic Interference and Electromagnetic Compatibility in Power Electronics System
Chinese Journal of Electrical Engineering 2022, 8(3): 1
Published: 30 September 2022
Abstract PDF (39.5 KB) Collect
Downloads:49
Open Access Issue
Research and Modeling on the Characteristic Changes of EMI Filter Passive Components under the Influence of Aging
Chinese Journal of Electrical Engineering 2022, 8(3): 2-11
Published: 30 September 2022
Abstract PDF (802.3 KB) Collect
Downloads:83

At present, the power density of power electronic devices in data centers and electric vehicles is constantly increasing, and numerous electronic components are concentrated in a tight, high-temperature environment, which aggravates the performance degradation of electronic components. Consequently, X and Y capacitors, common-mode inductors, and differential-mode inductors used for electromagnetic interference (EMI) suppression suffer from aging effects, and their performance continues to decline. However, the electromagnetic compatibility test is often conducted immediately after the power electronic equipment leaves the factory. The electromagnetic compatibility of power electronic equipment is affected by aging, which is not assessed in current industrial testing. This study conducts aging experiments on passive electronic components in EMI filters and measures the impedance in the frequency range from 150 kHz to 30 MHz. Subsequently, a multi-element aging model based on electromagnetic field analysis is established. The proposed model is suitable for electromagnetic compatibility analysis considering aging. Finally, the aging performance of a commercial two-stage EMI filter is predicted to verify the model proposed in the study. The proposed model explains the degeneration of the EMI filter with aging in the frequency range of 150 kHz to 1 MHz, with a maximum amplitude error of 0.58 dB and phase error of 1.0°.

Total 5