Sort:
Issue
Simulation analysis and experimental study on stiffness and fatigue life fluctuation of leaf spring rubber bearings
Journal of Beijing University of Aeronautics and Astronautics 2025, 51(5): 1726-1734
Published: 21 July 2023
Abstract PDF (2.3 MB) Collect
Downloads:29

The leaf spring rubber bearings are important load-bearing and vibration-absorbing components in heavy trucks and often suffer from short fatigue life and poor durability under cyclic loading conditions. This work took the leaf spring rubber bearing as the research object, calculated its vertical static stiffness, and compared it with the experimental stiffness. The reason why the experimental stiffness curve is folded was explained through bearing forces. Based on the critical plane method and fatigue crack propagation theory, the dynamic heat build-up and fatigue life of the leaf spring rubber bearing under a vertical compressive load of 260 kN were predicted by using a thermo-mechanical coupling analytical approach. The results show that the error between the simulated maximum temperature and the experimental temperature is around 5.0%, and the error between the predicted fatigue life and the mean value of the bench test is 7.5%. Based on the tensile fatigue test data of rubber specimens, a two-parameter Weibull distribution model for crack precursor size is fitted, and the initial size range of microcracks is inferred to be between 29.8 μm and 62.8 μm, with a median of 38.5 μm. The fatigue simulation life of the leaf spring rubber bearing calculated based on the distribution data of the crack precursor size ranges from 18 000 to 39 000 cycles, quantitatively explaining the fluctuation of the bench fatigue test life. This work can provide guidance for the optimal design of the fatigue life of vibration-absorbing rubber products.

Open Access Research Article Issue
A comparative study of 85 hyperelastic constitutive models for both unfilled rubber and highly filled rubber nanocomposite material
Nano Materials Science 2022, 4(2): 64-82
Published: 16 July 2021
Abstract PDF (9 MB) Collect
Downloads:45

Nonlinear finite element analysis is widely used for structural optimization of the design and the reliability analysis of complex elastomeric components. However, high-precision numerical results cannot be achieved without reliable strain energy functions (SEFs) of the rubber or rubber nanocomposite material. Although hyperelastic constitutive models have been studied for nearly 80 years, selecting one that accurately describes rubber's mechanical response is still a challenge. This work reviews 85 isotropic SEFs based on both the phenomenological theory and the micromechanical network theory proposed from the 1940s to 2019. A fitting algorithm which can realize the automatic fitting optimization and determination of the parameters of all SEFs reviewed is developed. The ability of each SEF to reproduce the experimental data of both the unfilled and highly filled rubber nanocomposite is quantitatively assessed based on a new proposed evaluation index. The top 30 SEFs for the unfilled rubber and the top 14 SEFs for the highly filled rubber nanocomposite are presented in the ranking lists. Finally, some suggestions on how to select an appropriate hyperelastic constitutive model are given, and the perspective on the future progress of constitutive models is summarized.

Total 2